CRU Dataport RJR110 Ultra320 Handbuch installieren

Blättern Sie online oder laden Sie pdf Handbuch installieren für Gehege CRU Dataport RJR110 Ultra320 herunter. CRU Dataport RJR110 Ultra320 2 Seiten.

Seite drucken

RJR110 Ultra320 Install Guide

Removable SCSI Ultra320 Drive Enclosures

Note: For applications requiring frequent drive swapping or

replacement, CRU-DataPort recommends the rugged DataPort or

Data Express removable enclosures for high insertion environments.

Power

LED

Drive

Activity

LED

Figure 1: Front Panel

Front Panel

Unit ID Number Indicator: This LED displays the SCSI ID of the

SCSI drive carrier.

Key Lock/Drive Power Switch: The keylock/drive power

switch performs three functions. The key switch assures proper

seating of the drive carrier within the receiving frame, turns

power to the drive carrier ON and OFF, and prevents unauthorized

removal or installation of the carrier. For the computer to access

data on the disk drive, the key must be turned counterclockwise

to the locked position.

LEDs:

Power - Steady glow indicates power ON.

Drive Activity- Steady glow indicates that drive is inserted

and ready for access. Flashing indicates drive is being ac-

cessed.

Fan - Green indicates normal fan operation. Red indicates fan failure.

OverTemp - Flashing red indicates overtemperature condi-

tions (default is 60° C). Audible alarm will also sound.

Reset Switch: This will reset OverTemp LED back to Green, as

well as turn off audible alarm.

Carrier Fan: Front-mounted carrier fan provides enhanced heat

dissipation (4.7 CFM).

Fan

LED

Key Lock

Carrier

OverTemp

Handle

LED

Rugged, Reliable, Mobile, Secure

Reset

Switch

Rear Panel

DC Power Connector: Uses a standard 4-pin DC Power Connec-

tor to accept DC power.

I/O Connector: The input/output connector provides a standard

interface for all Ultra320 signals.

Cooling Fan: Receiving frame fan provides enhanced heat

dissipation (4.7 CFM).

Unit ID Select Switch: (See Figure 2) Allows user to select the ID

number of the disk drive. Refer to table below for Unit ID hex refer-

ence.

Installation

NOTES: A #1 and #2 Phillips screwdriver will be required

for this procedure.

RJR110 supports implementations with a maximum of 2 drives per

channel.

1-800-260-9800