aeolus KaniStar Warmology WMS-1501 Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Haustierpflegeprodukt aeolus KaniStar Warmology WMS-1501 herunter. aeolus KaniStar Warmology WMS-1501 5 Seiten.
Seite drucken
WMS-1501-MT
WARMOLOGY MAT（Optional Accessory）
1. The best solution available for Convalescent Animal Normothermia maintenance.
2. The fabric will remain dry and warm for extended periods of treatment during ventilation and fluid
transfusion.
Allowing the patients to avoid the pain and discomfort of eczema, bedsores (pressure ulcers), Reliev-
ing possible irritation to the patient's skin which could cause skin problems, especially when patient's
activities have been restricted in a cage where the mat or floor is wet for a longer than normal period.
This mat is an ideal choice to help create a 24/7 dry and warm environment for animals. This
significantly helps the healing process.
3. Made from patent pending fabric with cubic honeycomb structure, provides 3D support to the
patient's body (40 points per square centimetre), filtering dirt in dense fibres.
1. Flexible, easily moulded to suit different sized animals.
2. The sterilized warm air will provide much better ventilation. Also significantly lower the risk of
infection.
3. Definitely a very good choice for young animal incubation.
4. Machine washable, easy to clean, eco-friendly (SGS approved).
5. No electric hazard risk, (no electric wires are used internally), preventing possible injury from
exposure to liquids and chewing.
Safety Warning
All maintenance and repairs should be carried out by qualified authorized trained technicians.
All animal care should be supervised by a qualified licensed veterinarian.
If the unit starts to make a continuous noise, please contact an Authorized service centre.
The machine housing can be wiped clean with a mild cleaning agent that is non-abrasive.
04
Specifications
Dimension
Noise Level
Filtering and sterilization
Negative ion
Weight
Vent Hose
Suggested filter replacement cycle
Suggested Operation Environment
Relative Humidity
Altitude
Warming time
Temperature Control Tolerance
Storage and Transportation Temperature
Electrical Parameters
Heating Element
PTC, 800W
Fan Motor
45W
Air Volume
110V /95CFM
220V /78CFM
Wind Pressure
110V /26mmAq
220V /18mmAq
Fuse
Porcelain Fuse
30cm×22cm×36cm (12" ×8.65" ×14")
49dB (high speed)
43dB (low speed)
Three tiered filtering system
0.2μm HEPA filter
254nm ultraviolet sterilization light
6×106Pcs/cm 3 ±10%
6.14kg (13.52lbs)
Food class, flexible, sensor inside.
2 months or over 120 hours
Temperature: -20°C -30°C
35% -80%
≤3200m
2 -8 minutes
±1.0°C
-10°C -45°C
Regulation
IEC60601
Rotational Speed
110V /3540RPM
220V /3945RPM
Rated Current
12A (110 -120VAC)
8A (220 -240VAC)
Rated Fuse
15A (125VAC)
8A (250VAC)
05