aeolus UC-1901L Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Haustierpflegeprodukt aeolus UC-1901L herunter. aeolus UC-1901L 10 Seiten. Professional multifunctional veterinary intensive care unit

Seite drucken
aeolus UC-1901L Benutzerhandbuch
OFF
0
8. Emergency Vent Setting
OFF
0
The emergency ventilation port is designed as a fail-safe, for
1
OFF
necessary fresh air in critical situations like a power supply
failure.
9
OFF
The fan is powered by a Lithium battery pack, which will allow several operations without a power
supply from the mains power.
OFF
8
a) Enter "Setting Mode".
b) Select suitable vent opening mode by shifting the "ON", "OFF" and "AUTO" on "Emergency Vent
OFF
0
Setting" bar.
0
OFF
Note: There are three working modes of Emergency Vent, ON, OFF and AUTO.
A. ON, means the vent will stay open unconditionally.
OFF
1
B. OFF, means the vent will be shut unless power supply failure is detected, then it will
be opened for fresh air.
9
OFF
OFF mode is NOT recommended to be used.
C. AUTO, means the vent will be opened in the following conditions.
OFF
8
C1: Power supply failure.
C2: O
Density in compartment drops to lower than 15%.
2
C3: O
Density ≤25% and CO
2
OFF
0
Density Alarm setting for over 3 minutes.
C4: O
Density ≥25% and CO
2
0
OFF
9. Exam Light
1
OFF
a) Enter "Setting Mode".
b) Click the existing time figure in "Exam Light" bar.
OFF
9
c) Input the desired working time for the pure white exam light
by clicking the newly opened displayed setting box, in the range
8
OFF
of 1 -360 minutes.
d) Click "Enter" to set the exam light working time, click the "X" in
the top right corner of the settings box to close the settings box.
e) Switch on exam light when needed by shifting OFF button to
ON as displayed. The light can be switched off by shifting from
ON to OFF at anytime.
OFF
10. Blue Light Therapy
0
OFF
0
a) Enter "Setting Mode".
b) Click the existing time figure in "Blue Light Therapy" bar.
c) Input the desired working time for blue light by clicking the
OFF
1
displayed setting box, in the range of 1 -360 minutes.
d) Click "Enter" to set the blue light working time, click the "X" in
OFF
9
the top right corner of the settings box to close the settings box.
e) Switch on blue light when needed by shifting OFF button to
OFF
8
ON as displayed below.
Remarks:
When therapeutic blue light is on, exam light and illumination
yellow light will be shut down automatically; once the blue light
finishes working, other lights will resume.
Emergency Vent Se�ng
Density stabilizes at the level of greater than CO
2
Density level exceeds 4500ppm.
2
Exam Light
30
0～360
2
1
5
4
8
7
+/-
0
25.0
25.0
Exam Light
30.0
30.0
50
50
1500
1500
-
Blue Light
3
Therapy
-
3
+
+
中
Blue Light Therapy
中
Auto
33
Auto
0～360
1
2
4
5
25.0
7
8
30.0
+/-
0
50
1500
-
Blue Light
3
Therapy
+
中
Auto
10
0
50
1500
1
3
11. Negative Ion Set
-
+
9
a) Enter "Setting Mode".
MIDDLE
中
b) Click the existing time figure in "Negative Ion Timer" bar.
8
c) Input the desired working time for negative ion gener-
Auto
ator by clicking the newly opened displayed setting box, in
the range of 0 -72 hours.
d) Click "Enter" to set the negative ion working time; click the
"X" in the top right corner of the settings box to close the
settings box.
e) Switch on negative ion generator when needed by shifting
OFF button to ON as displayed below.
12. Nebulizer and Timer
a) Open the nebulizer chamber door on front control panel of
the machine.
b) Gently take the nebulizer assembly out from the chamber, be
careful not to stretch the pipeline too much.
c) Open nebulizer nozzle cap by twisting counterclockwise.
2
d) Pour medicine liquid into the medicine cup, replace nozzle
cap clockwise.
e) Attach the cup nozzle part into the silicon port at the left
upper corner of the transparent door.
f) Enter "Setting Mode".
g) Click the existing time figure in "Nebulizer Timer" bar.
h) Input the desired working time for nebulizer by clicking the
newly opened displayed setting box, in the range of 1 -90
minutes.
3
CLR
i) Click "Enter" to set the nebulization working time; click the "X"
6
DEL
in the top right corner of the settings box to close the settings
9
box.
Enter
.
j) Turn the nebulizer on when needed by shifting OFF button to
OFF
ON as displayed below.
0
OFF
0
0
OFF
Remarks: During nebulization treatment, cooling, heating and
0
OFF
ventilation functions will shut down, for better preservation of
1
OFF
medicine atmosphere in the compartment.
1
OFF
OFF
9
9
OFF
13. Ultra-violet Timer
8
OFF
OFF
8
a) Enter "Setting Mode".
b) Click the existing time figure in "Ultra-violet Timer" bar.
c) Input the desired working time for ultra-violet sterilization by
3
CLR
clicking the displayed setting box, in the range of 1 -90 minutes.
6
DEL
d) Click "Enter" to set the ultra-violet sterilization working time;
OFF
0
9
click the "X" in the top right corner of the settings box to close
Enter
the settings box.
.
OFF
33
e) Switch on ultra-violet sterilization light when needed by
1
OFF
shifting OFF button to ON as displayed below.
9
OFF
Note: There must be No Animals in the unit when this function is
being used.
OFF
8
OFF
25.0
30.0
OFF
50
1500
OFF
3
+
OFF
中
Auto
25.0
30.0
50
1500
-
3
+
中
Auto
25.0
30.0
50
1500
3
+
中
Auto
25.0
30.0
50
25.0
30.0
1500
50
3
+
1500
3
中
+
Auto
中
Auto
25.0
30.0
50
1500
-
3
+
中
Auto
11
OFF
0
0
OFF
Nega�ve Ion
0
OFF
-
Timer
9
OFF
Nega�ve Ion Timer
2
8
OFF
0～72
1
2
3
CLR
4
5
6
DEL
7
8
9
NO
0
Enter
+/-
0
.
0
NO
Nega�ve Ion
2
ON
Timer
9
OFF
Nozzle cap
OFF
8
Medicine cup
OFF
0
Cone gasket
0
OFF
0
OFF
Nebulizer Timer
-
OFF
9
Nebulizer Timer
20
8
OFF
0～90
1
2
3
CLR
NO
0
4
5
6
DEL
0
NO
OFF
0
7
8
9
Enter
2
ON
+/-
0
.
-
0
OFF
OFF
Nebulizer Timer
9
1
OFF
-
8
OFF
9
OFF
OFF
Ultra-violet Timer
0
Ultra-violet Timer
15
0～90
NO
0
1
2
3
CLR
0
NO
4
5
6
DEL
2
NO
7
8
9
Enter
OFF
9
+/-
0
.
15
ON
Ultra-violet Timer