aeolus HERCULES TD-900XT Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Trockner aeolus HERCULES TD-900XT herunter. aeolus HERCULES TD-900XT 4 Seiten. Pet dryer
Seite drucken
Carbon Brush
1.
2.
Remove
the
retaining
Remove the 4 wires
screws on front cap by
from the connection
cross screwdriver in arrow
terminal.
direction, and open the
front cap.
4.
5.
Put the new brushes
Lift the little iron panel up
in, and tighten the
with flathead screwdriver,
brass clip with nipper
open the brass clip which
pliers
to
fix
the
holds the motor wire to
varnished wires.
remove the old carbon
brushes.
3.
7.
Slide out the rear motor
bracket by fitting the little gap
Remove
the
three
on the bracket to the screws
screws which fix the
on the housing.
front motor bracket one
by one.
6.
Groomers' Third Arm
Twist the little iron to a
certain angle to fix the
carbon brush brass
1.
rear cap.
Fix the nozzle with the metal clamp.
8.
9.
After the middle rubber
Change carbon brushed
ring and rear motor
on
the
rear
motor
bracket
taken
out,
according
to
the
remove the rear motor.
instructions in box 4, 5, 6
Ｐｕｔ ａｌｌ ｔｈｅ ｐａｒｔｓ ｂａｃｋ ｉｎ ｒｅｖｅｒｓｅ ｏｒｄｅｒ．
※
Ｔｈｅ ｐｏｗｅｒ ｓｕｐｐｌｙ ｍｕｓｔ ｂｅ ｃｕｔ ｏｆｆ ｂｅｆｏｒｅ ｃｈａｎｇｉｎｇ ｃａｒｂｏｎ ｂｒｕｓｈｅｓ．
2.
Wall-mounting Bracket
Fix the retaining screws in broken line
showed in the picture; examine the strength
and stability after works done.
The wall which you want to attach the bracket
to must be a solid wall which could bear
weight loading!