ARIETE 5577/6 Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Eisen ARIETE 5577/6 herunter. ARIETE 5577/6 8 Seiten.

To avoid pure wool, silk and synthetic materials becoming shiny, it makes good sense to iron them on the reverse side. For

other materials, especially velvet, which can become shiny very easily, cover them with a cloth and iron in one direction only,

using light pressure. The iron must be kept constantly moving over the fabric.

AfTer IronIng

Turn off the appliance by pressing the switch (L). Disconnect the power supply cable from the power point.

Let the iron cool down on its stand, taking care not to touch the power cables and connection with the hot parts

of the appliance.

Empty the water tank completely so as to prevent the water from stagnating, which may form lime deposit (Fig. 13). Put the

appliance back on top of a stable surface and out of the reach of children.

Warning!

Before cleaning, always disconnect the plug from the power point and allow the iron to cool down on its stand grille.

Warning!

Never immerse the appliance in water or other liquids.

Warning!

Check the state of the power cable of your iron on a regular basis before using it, and if it is damaged, take it to the

service centre closest to you to have it replaced only by specialised personnel.

Any deposits and other residue material on the soleplate can be removed using a cloth soaked in a water and vinegar solu-

tion. Always dry the soleplate with a dry cloth.

Warning!

Do not use abrasives for cleaning the soleplate. Try and keep the soleplate smooth: avoid contact with metal objects.

cleaning the tank

Clean the water tank from time to time by putting fresh water in it. rinse and empty (Fig. 13).

Warning!

Do not put vinegar, decalcifying products or other additives in the tank; Otherwise, the warranty may be revoked.

cleaning the iron

Clean plastic parts with a damp, non-abrasive cloth and dry them with a dry cloth.

note: it is absolutely normal that the white plastic parts of the iron slightly change in colour after a certain period

of use at high temperatures.