Dimplex DS7425DLX Service-Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Service-Handbuch für Herd Dimplex DS7425DLX herunter. Dimplex DS7425DLX 12 Seiten.
Auch für Dimplex DS7425DLX: Service-Handbuch (12 seiten), Benutzerhandbuch (14 seiten)

Seite drucken

Remove wiring connections from

noting their original locations.

ceiver

From inside the unit, break off the 4 mounting studs

by grasping with pliers and twisting on the protruding

part of the stud, push the remainder of the studs out

through the back panel.

! NOTE: New mounting studs are supplied with the

replacement

Remote Control Receiver

Reassemble in the reverse order as above.

TO REPLACE LOg SET DRIVER

BOARD - DS7425DLX MODEL ONLY

WARNINg: If unit was operating prior to servicing

allow at least 10 minutes for light bulbs and heating ele-

ment to cool off to avoid accidental burning of skin.

WARNINg: Disconnect power before attempting any

maintenance or cleaning to reduce the risk of electric

shock or damage to persons.

Open door by pulling the handles.

Loosen the 2 retainers on the inner sides of the unit by

turning counter clockwise.

Remove 4 screws that secure the top on the rear of the

unit.

Lift the top off of the unit. Carefully remove the partially

reflective glass and store in a safe place to prevent

damage.

Locate the Log Set Driver on the rear wall of the unit.

Remove wiring connections from Log Set Driver noting

their original locations.