Dimplex MILANOef EDS7001F Teile- und Servicehandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Teile- und Servicehandbuch für Herd Dimplex MILANOef EDS7001F herunter. Dimplex MILANOef EDS7001F 17 Seiten. Dimplex milano stove parts and service manual
Auch für Dimplex MILANOef EDS7001F: Teile- und Servicehandbuch (17 seiten)
Seite drucken
ef
EDS7001F MILANO
If the stove was operating prior to servicing allow at least 10 minutes for light
bulbs and heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the
risk of electric shock or damage to persons.
TO REPLACE HEATER ON/OFF SWITCH
1. Remove the stove pipe kit (if equipped).
2. Unscrew the two black knobs on the front of the unit by turning
counterclockwise.
3. Grasp onto the front door, gently lift up and pull the door off of the unit.
4. Remove the upper light bracket mounting screws from the top and remove
the light bracket assembly from the unit.
5. Locate the four cam locks on the side panels inside the upper corners of
the stove and turn with a large slot screwdriver so the triangle on the cam
lock is pointing up towards the top of the stove.
6. Grasp the top at both sides and gently pull to release the top.
7. Locate the heater on/off switch mounted on the rear panel and disconnect
the wiring clips and connections noting their original locations.
8. Depress the retainer clips on the rear of the switch and push the switch
out of the rear cover.
9. Properly orientate the new switch and connect all of the wiring clips and
connections.
10. Reassembly in the reverse order as above.
12