Crutchfield 016 0045 Stammblatt - Seite 6

Blättern Sie online oder laden Sie pdf Stammblatt für Car Stereo System Crutchfield 016 0045 herunter. Crutchfield 016 0045 8 Seiten. For dodge dakota

Seite drucken

016 0045

Rear Speakers -- Club Cab

1. Pry off two (2) seat belt hanger

covers (2). Remove one (1) Torx T-47

bolt securing each seat belt hanger

(Figure 1).

2. Starting at rear of top side panel, pry

panel loose and work toward front to

release all clips (Figure 2).

3. Work seat belt adjustment slide

through panel. Remove seat belt from

panel and remove top side panel.

4. Pry out bottom side panel starting at

the top to release three (3) plastic

clips.

5. Hold panel out to access speaker.

Remove three (3) phillips screws

securing speaker. Pull out speaker,

disconnect and remove.

6. Secure replacement speaker to

speaker adaptor bracket following

instructions supplied with adaptor

bracket.

Connect speaker wiring adaptor of

replacement speaker to vehicle

speaker connector. Secure

speaker/bracket assembly with

screws previously removed (Figure 3).

8. Test speaker operation and reinstall

rear side panel by reversing removal

steps. Note: Be sure seat belt

hanger bolt is secure.

FIGURE 1

Seat Belt Hanger Cover

FIGURE 3

1-800-955-9094

Make sure seats and seat belts anchors are

secured to manufacturers specifications.

Technical Service

NOTES:

Please read first

• Instructions show factory size speakers only. Cutting,

fabricating, or speaker adaptor brackets (not shown)

will be required for other speaker sizes.

FIGURE 2

Bottom Side Panel

SAFETY CHECK

Top Side Panel