Aeon Labs Aeotec MULTISENSOR 6 Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch für Zubehör Aeon Labs Aeotec MULTISENSOR 6 herunter. Aeon Labs Aeotec MULTISENSOR 6 14 Seiten.
Auch für Aeon Labs Aeotec MULTISENSOR 6: Benutzerhandbuch (11 seiten)
Seite drucken
Labs' affiliates, shareholders, directors, officers, employees,
contractors, agents and other representatives harmless from all
demands, claims, actions, causes of action, proceedings, suits,
assessments, losses, damages, liabilities, settlements, judgments,
fines, penalties, interest, costs and expenses (including fees and
disbursements of counsel) of every kind (i) based upon personal
injury or death or injury to property to the extent any of the foregoing
is proximately caused either by a defective product (including strict
liability in tort) or by the negligent or willful acts or omissions of
Customer or its officers, employees, subcontractors or agents, and/
or (ii) arising from or relating to any actual or alleged infringement
or misappropriation of any patent, trademark, mask work, copyright,
trade secret or any actual or alleged violation of any other
intellectual property rights arising from or in connection with the
products, except to the extent that such infringement exists as a
result of Aeon Labs' manufacturing processes.
IN NO EVENT SHALL AEON LABS BE LIABLE FOR ANY INDIRECT,
INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES, OR
DAMAGES FOR LOSS OF PROFITS, REVENUE, OR USE INCURRED
BY CUSTOMER OR ANY THIRD PARTY, WHETHER IN AN ACTION
IN CONTRACT, OR TORT, OR OTHERWISE EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. AEON LABS' LIABILITY AND
CUSTOMER'S EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION ARISING
IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF THE
PRODUCTS, WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY,
BREACH OF WARRANTY, BREACH OF AGREEMENT, OR EQUITABLE
PRINCIPLES, IS EXPRESSLY LIMITED TO, AT AEON LABS' OPTION,
REPLACEMENT OF, OR REPAYMENT OF THE PURCHASE PRICE FOR
20
1.
If your Z-Stick is plugged into a gateway or a computer, unplug it.
2.
Take your Z-Stick to your MultiSensor.
3.
Press the Action Button on your Z-Stick.
4.
Press the Action Button on your MultiSensor.
5.
You can test if your MultiSensor has been successfully included
into your Z-Wave network by pressing its Action Button. If you
press the button and your sensor's green LED is solid for a
few seconds, then inclusion has been successful. If the green
LED blinks when the button is pressed, the inclusion has been
unsuccessful and you should repeat the above steps.
6.
Press the Action Button on the Z-Stick to return it to inclusion
mode. Return it to your gateway or computer.
If you're using a Minimote:
Include
1.
Take your Minimote to your MultiSensor.
2.
Press the Include button on your Minimote.
Press the Action Button on your MultiSensor.
3.
4.
You can test if your MultiSensor has been successfully included
into your Z-Wave network by pressing its Action Button. If you
press the Action Button and your sensor's green LED is solid for
5