Dimplex XLS18N Installationsanleitung Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Elektrischer Heizer Dimplex XLS18N herunter. Dimplex XLS18N 8 Seiten. Ultra-slim storage heaters
Auch für Dimplex XLS18N: Betriebsanleitung (10 seiten), Betriebsanleitung (4 seiten), Installationsanleitung Handbuch (8 seiten), Betriebsanleitung (4 seiten), Installationsanleitung Handbuch (8 seiten)

5. Stand heater on its feet and remove all packaging

pieces.

8. If the floor is carpeted then the carpet should be slit and

underlay cut away to allow the feet to rest firmly on the

floor. Carpet gripper must be locally removed so that the

feet may rest in a level position.

6. IMPORTANT XLS Models Only - Locating the

external sensor

The sensor is situated at the rear of the lower right corner

of the heater.

a) Remove sensor carefully from its retaining clips and

move to one side.

b) Slide down plastic sensor carrier as far as it will go so

that the two plastic fixings are above the retaining notches.

Replace sensor carefully in its retaining clips.

7. Position heater against wall in intended final position,

taking note of the minimum fixing dimensions.

If fitted, the Dimplex storage heater shelf should be fixed

in accordance with the instructions enclosed with the

shelf.

9. Having prepared, where necessary, the floor, the

position of the wall bracket should be marked on the wall.