Aeon Labs Z-Stick Betriebsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Adapter Aeon Labs Z-Stick herunter. Aeon Labs Z-Stick 5 Seiten. Z-wave usb adapter

Operating instructions:

The Z-Stick operates in three distinct modes: Inclusion-Mode, Removal-Mode

and SerialAPI-Mode. Both Inclusion-Mode and Removal-Mode require the Z-Stick

to be unplugged from the USB connector of the host, while SerialAPI-Mode

requires that the Z-Stick to be plugged into the USB connector of the host.

• Inclusion-Mode : Adding/Including Z-Wave Devices into the Z-Wave Network

1. To initiate Inclusion-Mode, unplug the Z-Stick from the USB connector and

then tap the button. (The LED will blink slowly.)

Note: While in Inclusion-Mode, the Z-Stick is in perpetual add/inclusion.

There is no need to press the button on the Z-Stick again to include each

new device.

2. To include a new Z-Wave device into the network, simply go to the device

with the Z-Stick and press the button on the device you wish to include.

(The LED on the Z-Stick will blink fast during a network neighbor discovery

and stay solid for 3 seconds to indicate successful inclusion of the device

into the network.)

3. The LED will then return to blinking slowly, indicating readiness for further

device inclusions. Repeat step 2 for each device as you wish to include.

4. Tap the Z-Stick button to turn it off.

• Removal-Mode : Deleting/Removing/Excluding Z-Wave Devices from the Z-

Wave Network

1. To initiate Removal-Mode, unplug the Z-Stick from the USB connector.

Then press and hold down the button for approximately 3 seconds. (The

LED will transition from blinking slowly to blinking fast.)

Note: While in Removal-Mode, the Z-Stick is in perpetual removal/exclusion

where it will remove Z-Wave devices from the networks they are currently

paired to. There is no need to press the button on the Z-Stick again to

exclude each device.

2. To remove a Z-Wave device from the network, simply go to the device

with the Z-Stick and press the button on the device you wish to remove.