Pioneer AVIC-N3 Hardware-Handbuch - Seite 20

Blättern Sie online oder laden Sie pdf Hardware-Handbuch für Auto-Empfänger Pioneer AVIC-N3 herunter. Pioneer AVIC-N3 27 Seiten. Dvd multimedia av navigation server
Auch für Pioneer AVIC-N3: Benutzerhandbuch (34 seiten), Schnellstart-Handbuch (2 seiten)

Seite drucken

Symptom

Power doesn't turn on.

The system doesn't

operate.

No sounds are heard.

The volume level will

not rise.

When the ignition

switch is turned ON (or

turned to ACC), the

motor sounds.

Handling and Care of the Disc

Some basic precautions are necessary when

handling your discs.

DVD Map Discs

• Do not use discs other than those intended for

this product. Use only discs approved by Pio-

neer.

➲ For suitable discs ➞ Page 6

❒ If you wish to use other DVD Map Discs,

first check that they are compatible with

this equipment and approved by Pioneer.

DVD drive and care

• Use only normal, round discs. If you insert

irregular, non-round, shaped discs they may

jam in the DVD drive or not play properly.

• Check all discs for cracks, scratches or warp-

ing before playing. Discs that have cracks,

scratches or are warped may not play properly.

Do not use such discs.

• Avoid touching the recorded (non-printed side)

surface when handling the disc.

• Store discs in their cases when not in use.

• Keep discs out of direct sunlight and do not

expose the discs to high temperatures.

• Do not attach labels, write on or apply chemi-

cals to the surface of the discs.

• To clean dirt from a disc, wipe the disc with a

soft cloth outward from the center of the disc.

Cause

Leads and connectors are incorrectly con-

nected.

The fuse is blown.

Noise and other factors are causing the

built-in microprocessor to operate incor-

rectly.

The volume level is low.

The attenuator or mute is on.

This system confirms whether a disc is

loaded or not.

Action (See)

Confirm once more that all connections are

correct.

Rectify the reason for the fuse blowing, then

replace the fuse. Be very sure to install the

correct fuse with the same rate.

Press the RESET button. (➞ Page 10)

Adjust the volume level.

Turn the attenuator or mute off.

This is a normal operation.

• If the heater is used in cold weather, condensa-

tion may form on components inside the DVD

drive. Condensation may cause the DVD drive

to not operate properly. If you think that con-

densation is a problem turn off the DVD drive

for an hour or so to allow the DVD drive to dry

out and wipe any damp discs with a soft cloth

to remove the moisture.

• Road shocks may interrupt disc playback.

DVD discs and other DVD media

types

• With some DVD-Video discs, it may not be pos-

sible to use certain functions.

• It may not be possible to play back some DVD

video discs.

• When DVD-R/DVD-RW discs are used, play-

back is possible only for discs which have been

finalized.

• When DVD-R/DVD-RW discs are used, play-

back is possible only for discs which have been

recorded with the Video format (video mode). It

is not possible to play back DVD-RW discs

which have been recorded with the Video

Recording format (VR mode).

• It may not be possible to play back DVD-R/

DVD-RW discs which have been recorded with

the Video format (video mode), because of disc

characteristics, scratches or dirt on the disc,

or dirt, condensation, etc. on the lens of this

product.