Pioneer AVIC-U310BT Installationshandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Installationshandbuch für Auto-Empfänger Pioneer AVIC-U310BT herunter. Pioneer AVIC-U310BT 45 Seiten. Flash memory navigation audio receiver
Auch für Pioneer AVIC-U310BT: Schnellstart-Handbuch (2 seiten), Broschüre (9 seiten), Wichtige Informationen Handbuch (38 seiten)

Seite drucken

Section

Installation

Precautions before

installation

CAUTION

! Never install this product in places where,

or in a manner that:

— It could injure the driver or passengers

if the vehicle stops suddenly.

— It may interfere with the driver's opera-

tion of the vehicle, such as on the floor

in front of the driver's seat, or close to

the steering wheel or shift lever.

! Make sure there is nothing behind the

dashboard or paneling when drilling holes

in them. Be careful not to damage fuel

lines, brake lines, electronic components,

communication wires or power cables.

! When using screws, do not allow them to

come into contact with any electrical lead.

Vibration may damage wires or insulation,

leading to a short circuit or other damage

to the vehicle.

! To ensure proper installation, use the sup-

plied parts in the manner specified. If any

parts other than the supplied ones are

used, they may damage internal parts of

this product or they may work loose and

the product may become detached.

! It is extremely dangerous to allow the

cables to become wound around the steer-

ing column or shift lever. Be sure to install

this product, its cables, and wiring away

in such a way that they will not obstruct

or hinder driving.

! Make sure that leads cannot get caught in

a door or the sliding mechanism of a seat,

resulting in a short circuit.

! Please confirm the proper function of

your vehicle's other equipment following

installation of the navigation system.

! Do not install this navigation system

where it may (i) obstruct the driver's vi-

sion, (ii) impair the performance of any of

the vehicle's operating systems or safety

features, including airbags, hazard lamp

buttons or (iii) impair the driver's ability

to safely operate the vehicle.

! Install the navigation system between the

driver's seat and front passenger seat so

that it will not be hit by the driver or pas-

senger if the vehicle stops quickly.

! Never install the navigation system in

front of or next to the place in the dash,

door, or pillar from which one of your vehi-

cle's airbags would deploy. Please refer to

your vehicle's owner's manual for refer-

ence to the deployment area of the frontal

airbags.

! Do not install the navigation system in a

place where it will impair the performance

of any of the vehicle's operating systems,

including airbags and headrests.

To guard against

electromagnetic interference

In order to prevent interference, set the follow-

ing items as far as possible from this naviga-

tion system, other cables or leads:

! FM, AM antenna and its lead

! GPS antenna and its lead

In addition you should lay or route each anten-

na lead as far as possible from other antenna

leads. Do not bind them together, lay or route

them together, or cross them. Such electro-

magnetic noise will increase the potential for

errors in the location display.

Before installing

! Consult with your nearest dealer if installa-

tion requires the drilling of holes or other

modifications of the vehicle.

! Before making a final installation of this

product, temporarily connect the wiring to

confirm that the connections are correct

and the system works properly.