Pioneer CD-INCAR2 Handbuch installieren

Blättern Sie online oder laden Sie pdf Handbuch installieren für Auto-Empfänger Pioneer CD-INCAR2 herunter. Pioneer CD-INCAR2 2 Seiten. Quick start guide

Seite drucken

What's in the box?

™

CD-INCAR2

inno

car kit

car cradle

remote

car antenna

power adapter

cassette

XM SureConnect

mounts

cleaning kit

adapter

™

inno

car kit

Listen to Live XM and recorded XM content*

Play MP3 and WMA files

Manage your tracks, favorite

channels, and playlists

Listen in your vehicle

Car Kit CD-INCAR2 is not compatible

with GEX-INNO1 and was designed to

work with GEX-INNO2BK only

*Hardware and required monthly subscription sold separately. Installation cost and other fees and taxes, including a

one-time activation fee may apply. Subscription fee is consumer only. XM products, programming, services, and fees are

subject to change, at any time, without notice. Channels with frequent explicit language are indicated with an XL. Channel

blocking is available for XM radio receivers by calling 1-800-XM-RADIO. Subscriptions subject to Customer Agreement

How to install the antenna

Every vehicle is different; for your safety, follow all instructions carefully. Consult a

professional installer if you have questions.

Keep excess cable behind

or under the dashboard.

Mount the antenna to the roof or trunk of the vehicle. During installation, make sure

you are outdoors and not obstructed by tall buildings.

Warning: Failure to properly install the antenna may result in injury to

yourself or to others if it becomes detached during an accident.

Setup: In Vehicle

Choose the best way to mount your car cradle.

How to use the swivel mount

To install the swivel mount, first find a suitable location. The swivel mount's adhesive

is very strong and may be difficult to remove. Do not install this mount on leather

surfaces and make sure the air temperature is at least 60ºF.

1. Clean the mounting surface with the

surface preparation kit. Peel away the

adhesive liner.

Peel off adhesive liner

How to receive XM through your car stereo

Plug in all of the connectors once

you have mounted the radio,

power

installed the antenna or used the

line out

included XM SureConnect and

plugged in the power adapter.

XM Antenna or

XM SureConnect

The line out should be used with

(See included XM

the included cassette adapter for

SureConnect guide for

more information)

the best sound quality.

1. Insert your inno into the car cradle.

2. Turn your inno player on.

3. Turn on your car stereo. Look for a

channel that sounds like it is receiving a

weak or no station. (88.1 - 107.9).

4. On your inno player press the XM

button. Scroll down to "Settings" choose

"FM Modulator" then pick "FM Frequency."

You may be in either "Live XM" or "My

Music" modes. (You will not hear any

music in the "My Music" mode unless you

have recorded content or mp3s).

5. Follow the on screen instructions to choose the

same frequency as you chose on your car

stereo. You should now be able to hear XM

through your car stereo.

2. Firmly press the swivel mount to the surface for 30 seconds. Allow 24 hours

before using the mount.

Either orientation may be used.

You can adjust the tension of

the mount with a screwdriver.

Be careful not to loosen it too

much when you are adjusting it,

or the swivel may come apart.

(not included)

If you need to remove the mount, carefully lift the adhesive pad with your fingers or a

spoon. Warming with a hair dryer for several minutes will help soften the adhesive.

Protect your ears

- Take care so that the earbud cable is not caught by your arm or other objects while

walking or exercising.

- Do not turn up the volume too high. Doctors warn against prolonged exposure to

high volume.

- Stop using your inno or turn the volume down if you have ringing in your ears.

Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes

of sound. So what sounds "normal" can actually be loud and harmful to your hearing. Set

your equipment at a safe level BEFORE your hearing adapts.

To establish a safer level:

Start your volume control at a low setting; Slowly increase

the sound until you can hear it comfortably and clearly, without distortion.

Once you have established a comfortable sound level:

Set the dial and leave

it there; taking a minute to do this now will help to preserve hearing.

Pioneer and the Consumer Electronics Association recommend you avoid prolonged exposure

to excessive noise. Under constant exposure such as sustained listening, sound levels above

85 decibels can be dangerous without hearing protection. (For reference, a garbage disposal

or loud shouting at 3 feet away are around 80 decibels; a food blender or gas lawn mower at

3 feet away are around 90 decibels.) The longer your exposure and/or higher the sound level,

the greater the danger of permanent hearing damage. Pioneer disclaims all liability for

hearing loss, bodily injury or property damage as a result of use or misuse of this product.

On all complaints and concerns call Customer Support at 1-800-421-1404

For hook-up and operation of your unit or to locate an Authorized Service Company, please call or write:

PIONEER ELECTRONICS SERVICE, INC.

P.O. BOX 1760, LONG BEACH, CALIFORNIA 90810

1-800-421-1404

www.pioneerelectronics.com

How to use the vent mount

To install the vent mount, find a horizontal vent that is strong enough to hold your

inno and its car cradle.

1. To insert the vent mount,

push it into the vent as shown.

To remove the vent mount, push

it into the vent and lift upwards

slightly to release the mount's hooks

from the vent vane.

Installed vent mount

2. Attach the car cradle to either

mount by sliding it into place.

FCC Statement

Please note that the power cable that has been supplied with your device is supplied with permanently

attached ferrite beads. It is the responsibility of the user to use the power cable with the ferrite beads.

The user is cautioned that changes or modifications not expressly approved by XM Satellite Radio Inc. can

void the user's authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the installation instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

- Reorient or relocate the receiving antenna of the affected receiver.

- Increase the separation between the XM equipment and the affected receiver.

- Connect the XM equipment into an outlet on a circuit different from that to which the

affected receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Warning: The FCC and FAA have not certified the inno Satellite Radio Receiver for

use in any aircraft (neither portable nor permanent installation). Therefore, XM

Satellite Radio cannot support this type of application or installation.