Pioneer DEH P4800MP Betriebshandbuch - Seite 24

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Auto-Empfänger Pioneer DEH P4800MP herunter. Pioneer DEH P4800MP 36 Seiten. Multi-cd control high power cd/mp3/wma player with rds tuner

Seite drucken

MAN-DEH-P4800MP-GB.fm Page 24 Thursday, September 29, 2005 11:55 AM

Multi-CD Player

Displaying text information on CD TEXT discs

* Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

Play time – DISC TITLE (disc title) – DISC ARTIST (disc artist name) – TRACK TITLE

(track title) – TRACK ARTIST (track artist name)

• If specific information has not been recorded on a CD TEXT disc, NO XXXX will be

displayed (e.g., NO TRACK TITLE).

Scrolling text information in the display

This unit can display the first 16 letters only of DISC TITLE, DISC ARTIST, TRACK

TITLE and TRACK ARTIST. When the recorded information is longer than 16 letters,

you can scroll the text to the left so that the rest of the title can be seen.

* Press DISPLAY and hold until the title begins to scroll to the left.

The rest of the title will appear in the display.

Using compression and bass emphasis

You can use these functions only with a multi-CD player that supports them.

Using COMP (compression) and DBE (dynamic bass emphasis) functions lets you

adjust the sound playback quality of the multi-CD player. Each of the functions has a

two-step adjustment. The COMP function balances the output of louder and softer

sounds at higher volumes. DBE boosts bass levels to give playback a fuller sound.

Listen to each of the effects as you select them and use the one that best enhances

the playback of the track or CD that you are listening to.

1. Press FUNCTION to select COMP.

Press FUNCTION until COMP appears in the display.

• If the multi-CD player does not support COMP/DBE, NO COMP is displayed when

you attempt to select it.

2. Press 8 or 2 to select your favorite setting.

Press 8 or 2 repeatedly to switch between the following settings:

COMP OFF – COMP 1 – COMP 2 – COMP OFF – DBE 1 – DBE 2

Audio Adjustments

Introduction of audio adjustments

Audio display

Shows the audio adjustment

status.

CUSTOM indicator

Shows when custom equalizer

curve is currently selected.

SW indicator

Shows when the subwoofer output

is turned on.

Bass booster indicator

Shows when the bass boost is in

effect.

Loudness indicator

Appears in the display when

loudness is turned on.

FIE indicator

Shows when the front image

enhancer is turned on.

* Press AUDIO to display the audio function names.

Press AUDIO repeatedly to switch between the following audio functions:

FAD (balance adjustment) – EQ (equalizer curve adjustment) – LOUD (loudness) –

SUB W (subwoofer on/off setting) – 80: 0 (subwoofer setting) – HPF (high pass filter)

– BASS (bass boost) – FIE (front image enhancer) – SLA (source level adjustment)

• When the subwoofer controller setting is P/O :FUL, you cannot switch to SUB W.

(Refer to page 29.)

• You can select the 80: 0 only when subwoofer output is turned on in SUB W.

• When selecting the FM tuner as the source, you cannot switch to SLA.

• To return to the display of each source, press BAND.

Note

• If you do not operate the audio function within about 30 seconds, the display is automatically

returned to the source display.