Pioneer DEH-10MP Benutzerhandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Empfänger Pioneer DEH-10MP herunter. Pioneer DEH-10MP 26 Seiten.
Seite drucken
Section
liD (
Operating this unit
3
Press A. or 'f' to adjust the source vo-
lume.
SLA +4 to SLA -4 is displayed as the source
volume is increased or decreased.
• To return to the normal display, press
BAND.~
Other Functions
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
Press SOURCE and hold until the unit
turns off.
2
Press SOURCE and hold until function
name appears in the display.
3
Press FUNCTION to select one of the in-
itial settings.
Press FUNCTION repeatedly to switch be-
tween the following settings:
Clock-AUX (auxiliary input)
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
BAND.
• You can also cancel initial settings by holding
down SOURCE until the unit turns off.
Setting the clock
Use these instructions to set the clock.
1
Press FUNCTION to select clock.
2
Press .... or
~
to select the segment of
the clock display you wish to set.
Pressing .... or
~
will select one segment of the
clock display:
Hour-Minute
3
Press A. or 'f' to set the clock.
Turning the clock display on or off
You can turn the clock display on or off.
®
En
)
• Even when the sources are off, the clock
display appears on the display.
•
Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
• The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1
Press FUNCTION to select AUX.
2
Press A. or 'f' to turn the auxiliary set-
ting on or off. ~