Pioneer DEH-2950MP Betriebshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Auto-Empfänger Pioneer DEH-2950MP herunter. Pioneer DEH-2950MP 50 Seiten. Installation manual
Auch für Pioneer DEH-2950MP: Installationshandbuch (6 seiten)

Seite drucken

Section

Operating this unit

Press c or d to set the sensitivity.

FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4

AM: LOCAL 1—LOCAL 2

The LOCAL 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 1 to 6.

Once stored you can tune in to those frequen-

cies with the touch of button.

! Storing broadcast frequencies with BSM

may replace broadcast frequencies you

have saved using buttons 1 to 6.

Press FUNCTION to select BSM.

Press a to turn BSM on.

Six strongest broadcast frequencies will be

stored in the order of their signal strength.

# To cancel the storage process, press b.

Built-in Player

Playing a disc

Insert a CD (CD-ROM) into the disc load-

ing slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a CD (CD-ROM) has been inserted, press

SOURCE to select the built-in CD player.

# You can eject a CD (CD-ROM) by pressing

EJECT.

Press a or b to select a folder when

playing a WMA/MP3/WAV disc.

# You cannot select a folder that does not have

a WMA/MP3/WAV file recorded in it.

# To return to folder 01 (ROOT), press and hold

BAND. However, if folder 01 (ROOT) contains no

files, playback commences with folder 02.

To perform fast forward or reverse,

press and hold c or d.

# If you select ROUGH, pressing and holding c

or d enables you to search every 10 tracks in the

current disc (folder). (Refer to Searching every 10

tracks in the current disc or folder on the next

page.)

To skip back or forward to another

track, press c or d.

Notes

! Read the precautions with discs and player on

page 13.

! If an error message such as ERROR-11 is dis-

played, refer to Error messages on page 13.

! There is sometimes a delay between starting

up disc playback and the sound being issued.

When being read, FRMTREAD is displayed.

! When playing CD-EXTRA or MIXED-MODE

CDs, WMA/MP3/WAV and CD-DA can be

swithced by pressing BAND.

! If you have switched between WMA/MP3/

WAV files and audio CD-DA, playback starts at

the first track on the disc.

! The built-in CD player can play back a WMA/

MP3/WAV file recorded on CD-ROM. (Refer to

page 14 for files that can be played back.)

! When playing back VBR (variable bit rate) re-

corded files, erapsed play time may not be dis-

played correctly.

! When playing WMA/MP3/WAV disc, there is

no sound on fast forward or reverse.

Repeating play

Repeat play plays the same track/folder within

the selected repeat play range.

Press FUNCTION to select RPT.

Press c or d to select the repeat range.

DSC – Repeat all tracks

TRK – Repeat just the current track

FLD – Repeat the current folder

# If you select another folder during repeat play,

the repeat play range changes to disc repeat.