Pioneer DEH-4500BT Betriebshandbuch - Seite 22

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Auto-Empfänger Pioneer DEH-4500BT herunter. Pioneer DEH-4500BT 33 Seiten. Cd rds receiver
Auch für Pioneer DEH-4500BT: Schnellstart-Handbuch (8 seiten)

Seite drucken

Section

Operating this unit

The rear speaker leads output and the RCA output of

this unit can be used to connect a full-range speaker

or subwoofer. Select a suitable option for your con-

nection.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

You can select any one of the options in the fol-

lowing list:

! REAR/SUB.W – Select when there is a full-

range speaker connected to the rear speaker

leads output and there is a subwoofer con-

nected to the RCA output.

! SUB.W/SUB.W – Select when there is a sub-

woofer connected directly to the rear speaker

leads output without any auxiliary amp and

there is a subwoofer connected to the RCA

output.

! REAR/REAR – Select when there is a full-

range speaker connected to the rear speaker

leads output and the RCA output.

If there is a full-range speaker connected to

the rear speaker leads output and the RCA

output is not used, you may select either

REAR/SUB.W or REAR/REAR.

S/W UPDATE (updating the software)

This function is used to update this unit with the lat-

est Bluetooth software. For about Bluetooth software

and updating, refer to our website.

! Never turn the unit off while the Bluetooth soft-

ware is being updated.

1 Press M.C. to display the data transfer mode.

Follow the on-screen instructions to finish updat-

ing the Bluetooth software.

System menu

Press and hold SRC/OFF until the unit

turns off.

Press and hold SRC/OFF until the main

menu appears in the display.

Turn M.C. to change the menu option

and press to select SYSTEM.

Turn M.C. to select the system menu

function.

For details, refer to System menu on page

17.

Using an AUX source

Insert the stereo mini plug into the

AUX input jack.

Press SRC/OFF to select AUX as the

source.

Note

AUX cannot be selected unless the auxiliary set-

ting is turned on. For more details, refer to AUX

(auxiliary input) on page 18.

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! Source name

! Source name and clock

If an unwanted display

appears

Turn off the unwanted display using the proce-

dures listed below.

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select SYSTEM.

Turn M.C. to display DEMO OFF and

press to select.

Turn M.C. to switch to YES.

Press M.C. to select.