Pioneer DEH-5200SD Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Auto-Empfänger Pioneer DEH-5200SD herunter. Pioneer DEH-5200SD 27 Seiten. Cd rds receiver

Seite drucken

Section

Operating this unit

! When playing back VBR (variable bit

rate)-recorded AAC files, the average bit

rate value is displayed. However, de-

pending on the software used to decode

AAC files, VBR may be displayed.

2 Folder number indicator

Shows the folder number currently playing

when the compressed audio is playing.

3 Track number indicator

4 PLAY/PAUSE indicator

5 S.Rtrv indicator

Appears when Sound Retriever function is on.

6 Song time (progress bar)

7 Play time indicator

Playing a CD/CD-R/CD-RW

1 Insert the disc, label side up, into the disc loading

slot.

1 If a disc has already been inserted, press SRC/

OFF to select the built-in CD player.

Ejecting a CD/CD-R/CD-RW

1 Press h (eject).

Playing songs on a USB storage device

1 Open the USB connector cover.

2 Plug in the USB storage device using a USB

cable.

Stop playing a USB storage device

1 You may disconnect the USB storage device at

anytime.

Playing songs on an SD memory card

1 Remove the front panel.

2 Insert an SD memory card into the SD card slot.

Insert it with the contact surface facing down and

press the card until it clicks and completely locks.

3 Re-attach the front panel.

4 Press SRC/OFF to select SD as the source.

Playback will start.

Stop playing an SD memory card

1 Remove the front panel.

2 Press the SD memory card until it clicks.

The SD memory card is ejected.

3 Pull out the SD memory card.

4 Re-attach the front panel.

Selecting a folder

1 Push M.C. up or down.

Selecting a track

1 Push M.C. left or right.

Fast forwarding or reversing

1 Push and hold M.C. left or right.

Returning to root folder

1 Press and hold BAND/ESC.

Switching between compressed audio and CD-DA

1 Press BAND/ESC.

Notes

! When playing compressed audio, there is no

sound during fast forward or reverse.

! USB portable audio players that can be

charged via USB will be recharged when

plugged in and the ignition switch is set to

ACC or ON.

! Disconnect USB storage device from unit

when not in use.

! If plug and play is on and a USB storage de-

vice is present, depending on the type of de-

vice, the source may switch to USB

automatically when you turn on the engine.

Please change plug and play setting as neces-

sary. Refer to USB plug&play (plug and play)

on page 16.

Displaying text information

Selecting the desired text information

1 Press DISP/

/SCRL.

CD TEXT discs: Play time—

and

: track title—

disc title—

: disc title and

track artist name and

title and play time—

name and

: disc title

WMA/MP3/AAC/WAV:

time—

: track title and : artist name—

track title and

: album title—

: folder name—play time— : artist name and

: album title—

: track title, : artist name

and

: album title

Scrolling the text information to the left

1 Press and hold DISP/

Notes

! Incompatible text stored with the audio file

may not be displayed or may be displayed in-

correctly.

! Depending on the version of iTunes used to

write MP3/AAC files onto a disc, comment in-

formation may be incorrectly displayed.

: disc artist name

: disc artist name and

: track title— :

: track title—

: track

: track title, : track artist

: track title and play

: file name and

/SCRL.