Pioneer DEH-6400BT Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Empfänger Pioneer DEH-6400BT herunter. Pioneer DEH-6400BT 25 Seiten. Cd rds receiver
Auch für Pioneer DEH-6400BT: Betriebshandbuch (36 seiten), Schnellstart-Handbuch (8 seiten)

Seite drucken

Installation

Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°) into

place.

1 Dashboard

2 Mounting sleeve

Install the unit as illustrated.

1 Nut

2 Firewall or metal support

3 Metal strap

4 Screw

5 Screw (M4 × 8)

Make sure that the unit is installed securely in

place. An unstable installation may cause skipping

or other malfunctions.

DIN Rear-mount

Determine the appropriate position

where the holes on the bracket and the side

of the unit match.

Tighten two screws on each side.

1 Screw

2 Mounting bracket

3 Dashboard or console

Use either truss (5 mm × 8 mm) or flush sur-

face (5 mm × 9 mm) screws, depending on

the bracket screw holes.

Removing the unit

Remove the trim ring.

1 Trim ring

2 Notched tab

Releasing the front panel allows easier ac-

cess to the trim ring.

When reattaching the trim ring, point the

side with the notched tab down.

Installation

Insert the supplied extraction keys into

both sides of the unit until they click into

place.

Pull the unit out of the dashboard.

Removing and re-attaching the

front panel

You can remove the front panel to protect your

unit from theft.

Press the detach button and push the front

panel upward and pull it toward you.

For details, refer to Removing the front panel to

protect your unit from theft and Re-attaching the

front panel on page 4.

Securing the front panel

The front panel can be secured with the sup-

plied screw.

1 Screw

Installing the microphone

CAUTION

It is extremely dangerous to allow the micro-

phone lead to become wound around the steer-

ing column or shift lever. Be sure to install the

unit in such a way that it will not obstruct driv-

ing.

Note

Install the microphone in a position and orienta-

tion that will enable it to pick up the voice of the

person operating the system.

When installing the microphone

on the sun visor

Install the microphone on the micro-

phone clip.

1 Microphone

2 Microphone clip

Install the microphone clip on the sun

visor.

With the sun visor up, install the microphone

clip. (Lowering the sun visor reduces the voice

recognition rate.)

Section