Pioneer MVH-8200BT Betriebshandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Auto-Empfänger Pioneer MVH-8200BT herunter. Pioneer MVH-8200BT 48 Seiten. Rds media center receiver
Auch für Pioneer MVH-8200BT: Schnellstart-Handbuch (9 seiten)

Seite drucken

1. Bluetooth Telephone

Section

Before You Start

If you want to dispose this product, do not mix

it with general household waste. There is a se-

parate collection system for used electronic

products in accordance with legislation that re-

quires proper treatment, recovery and recy-

cling.

Private households in the member states of

the EU, in Switzerland and Norway may return

their used electronic products free of charge

to designated collection facilities or to a retai-

ler (if you purchase a similar new one).

For countries not mentioned above, please

contact your local authorities for the correct

method of disposal.

By doing so you will ensure that your disposed

product undergoes the necessary treatment,

recovery and recycling and thus prevent po-

tential negative effects on the environment

and human health.

About this unit

The tuner frequencies on this unit are allo-

cated for use in Western Europe, Asia, the

Middle East, Africa and Oceania. Use in other

areas may result in poor reception. The RDS

(radio data system) function only operates in

areas with broadcasting RDS signals for FM

stations.

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result.

Also, damage to this unit, smoke, and over-

heating could result from contact with liquids.

! The Pioneer CarStereo-Pass is for use only in

Germany.

! Always keep the volume low enough to hear

outside sounds.

! Avoid exposure to moisture.

! If the battery is disconnected or discharged,

any preset memory will be erased.

Operating environment

This unit should be used within the tempera-

ture ranges shown below.

Operating temperature range: -10 °C to +60 °C

EN300328 ETC test temperature: -20 °C and

+55 °C

In case of trouble

Should this product fail to operate properly,

please contact your dealer or nearest author-

ized Pioneer Service Station.

Resetting the microprocessor

The microprocessor must be reset in the fol-

lowing situations:

! Before using this unit for the first time after

installation

! If the unit fails to operate properly

! When strange or incorrect messages ap-

pear on the display

RESET button

Remove the front panel.

Press RESET with a pen tip or other

pointed instrument.