Pioneer MXT-X366BT Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Empfänger Pioneer MXT-X366BT herunter. Pioneer MXT-X366BT 25 Seiten. Complete car audio package digital media receiver and 16cm 2-way speakers
Auch für Pioneer MXT-X366BT: Benutzerhandbuch (49 seiten)

Seite drucken

Section

Using this unit

Bluetooth device data stored on this unit can be

cleared. To protect your personal information,

clear the device memory before you pass the unit

on to someone else. The following information will

be deleted.

Device list/PIN code/call history/phone book/pre-

set phone numbers

1 Press M.C. to show the confirmation display.

YES is displayed. Clearing memory is now on

standby.

If you do not want to clear the Bluetooth device

data stored on this unit, turn M.C. to display

CANCEL and press it again to select.

2 Press M.C. to clear the memory.

CLEARED is displayed and the Bluetooth de-

vice data is cleared.

! While this function is in use, do not turn off

the engine.

BT VERSION (Bluetooth version display)

You can display the system versions of this unit

and of Bluetooth module.

1 Press M.C. to display the information.

APP CONN. SET (APP connect mode setting)

Select an appropriate option for your connected

device.

1 Press M.C. to select the desired setting.

WIRED (for iPhone)—BLUETOOTH (for smart-

phone)

! This setting is not available when the source is

set to PANDORA or APP.

About MIXTRAX

MIXTRAX technology is used to insert a variety

of sound effects in between songs, allowing you

to experience your music as a nonstop mix com-

plete with visual effects.

Notes

! Depending on the file/song, sound effects

may not be available.

! Turn MIXTRAX off if the visual effects it pro-

duces have adverse effects on driving. Refer

to Operations using the MIXTRAX button on

page 6.

MIXTRAX menu

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select MIXTRAX.

Turn M.C. to select the MIXTRAX func-

tion.

Once selected, the following MIXTRAX functions

can be adjusted. The function is enabled when

MIXTRAX is on.

SHORT MODE (short playback mode)

You can select the length of the playback time.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

1.0 MIN (1.0 minute)—1.5 MIN (1.5 minutes)—

2.0 MIN (2.0 minutes)—2.5 MIN (2.5 minutes)

—3.0 MIN (3.0 minutes)—OFF (off)

MIX PATTERN (mix pattern)

The MIXTRAX special effects display changes with

changes in the audio level.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! SOUND LEVEL – The mix pattern changes

according to the sound level.

! LOW PASS – The mix pattern changes ac-

cording to the bass level.

! RANDOM – The mix pattern changes ran-

domly according to the sound level mode

and low pass mode.

DISP FX (display effect)

The MIXTRAX special effects display can be turned

on or off.

1 Press M.C. to select the desired setting.

ON (MIXTRAX special effects display)—OFF

(normal display)

Using this unit

CUT IN FX (manual cut-in effect)

You can turn on or off the MIXTRAX sound effects

while manually changing tracks.

1 Press M.C. to select the desired setting.

ON (on)—OFF (off)

Initial menu

Press and hold SRC/OFF until the unit

turns off.

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select INITIAL.

Turn M.C. to select the initial menu func-

tion.

Once selected, the following initial menu func-

tions can be adjusted.

! S/W UPDATE is not available for MXT-X166UI.

FM STEP (FM tuning step)

1 Press M.C. to select the FM tuning step.

100 (100 kHz)—50 (50 kHz)

AM STEP (AM tuning step)/MW STEP (MW tuning

step)

1 Press M.C. to select the AM/MW tuning step.

9 (9 kHz)—10 (10 kHz)

SP-P/O MODE (rear output and preout setting)

The rear speaker leads output and the RCA output

of this unit can be used to connect a full-range

speaker or subwoofer. Select a suitable option for

your connection.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! REAR/SUB.W – Select when there is a full-

range speaker connected to the rear speak-

er leads output and there is a subwoofer

connected to the RCA output.

! SUB.W/SUB.W – Select when there is a

subwoofer connected directly to the rear

speaker leads output without any auxiliary

amp and there is a subwoofer connected

to the RCA output.

! REAR/REAR – Select when there is a full-

range speaker connected to the rear speak-

er leads output and the RCA output.

If there is a full-range speaker connected to

the rear speaker leads output and the RCA

output is not used, you may select either

REAR/SUB.W or REAR/REAR.

S/W UPDATE (updating the software)

This function is used to update this unit with the

latest Bluetooth software. For about Bluetooth

software and updating, refer to our website.

! Never turn the unit off while the Bluetooth soft-

ware is being updated.

1 Press M.C. to start updating.

Follow the on-screen instructions to finish up-

dating the Bluetooth software.

System menu

Press and hold SRC/OFF until the unit

turns off.

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select SYSTEM.