Pioneer Premier DEH-P960MP Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Auto-Empfänger Pioneer Premier DEH-P960MP herunter. Pioneer Premier DEH-P960MP 6 Seiten. Owner's manual
Auch für Pioneer Premier DEH-P960MP: Benutzerhandbuch (34 seiten), Betriebshandbuch (4 seiten)

Seite drucken

Installation

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame. (Fig. 9)

Frame

Insert the release pin into the hole in

the bottom of the frame and pull out

to remove the frame.

(When reattaching the frame, point

the side with a groove downwards

and attach it.)

2. Fastening the unit to the factory radio mounting bracket.

(Fig. 10) (Fig. 11)

Select a position where the screw holes of the bracket and

the screw holes of the head unit become aligned (are fitted),

and tighten the screws at 2 places on each side. Use either

binding screws (5 × 6 mm) or flush surface screws

(5 × 6 mm), depending on the shape of the screw holes in

the bracket

Screw

Dashboard or Console

Factory radio mounting bracket

Switching the DSP setting mode

This product features two operation modes: the 3-way network mode (NW) and the standard

mode (STD). You can switch between modes as desired. Initially, the DSP setting is set to

the standard mode (STD).

• After switching, reset the microprocessor. (Refer to operation manual.)

• Use a thin standard tip screwdriver to switch the DSP switch on the bottom of this

product.

Fig. 9

About the fixing screws for the front panel

If you do not operate the removing and attaching the front panel function, use the supplied

fixing screws to fix the front panel to this unit.

Fig. 10

Fixing screws

Fig.11

Fig. 12

Fig. 13