Pioneer S-L7 Betriebsanleitung - Seite 16

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Auto-Empfänger Pioneer S-L7 herunter. Pioneer S-L7 50 Seiten. Stereo cd receiver/stereo cassette deck/ speaker system

Seite drucken

@ pe

'Tee8s

BROADCAST RECEPTION

Do not place the AM

antenna

on a metallic case

including the CD receiver cabinet or near a CD

player, LD player, DAT recorder, personal compu-

ter or TV set. Any of these instaliations will cause

noise in reception.

Broadcast reception is not possible unless an an-

tenna is connected, so be sure to connect one.

. Press the FM/AM/STATION

button to select

either the FM or AM band.

SET

FIVI/AM/STATION Fl

2. Press the EJ or f=] button for lower or

higher frequencies.

[Manual tuning]

Press the [a] or = button and release quickly.

The tuning frequency will change by one step each

time the button is pressed. Press as many times as

necessary to tune in the desired station. The TUNED

indicator ( Y# } lights on the display unit when the sta-

tion is turned in best.

[Auto tuning]

Press the a) or fe] button until the frequency starts

to change, then release it.

The tuner will automatically search for a broadcasting

station, stops when one is found and the TUNED indi-

cator { Y#) lights on the display unit. To search for

another station, press again.

@ To interrupt auto tuning, press the = or Py but-

ton again.

[High-speed manual tuning]

Press and hold the [Eq] or fos] button.

— The frequency will change continuously and stop

when you remove your finger from the button.

When a stereo broadcast Is received, the stereo in-

dicator (a ) will light.

When the MONO indicator (C©) lights, it means the

currently received broadcast is being heard in mon-

aural sound.

<ARB7126> En

POWER

VOLUME —a

KO}

Uy) AN

@ Piper

MONO Reception

lf a stereo broadcast exhibits high levels of noise, use

the following procedure to set to monaural reception.

The sound from the speakers will no longer be heard

in stereo, but the level of noise should be reduced.

@ Press the MENU

button.

@ Use the fe] fe] buttons to select "FM AUTO/

MONO."

@) Press the SET button.

@ Use the i] El buttons to select "MONO",

The MONO

indicator (CO) will

light on the display unit.

"NOTE:

Once the MONO mode has been set, it will remain set

until manually changed. When you have finished lis-

tening to a broadcast with MONO set to ON, it is rec-

ommended

to reset the reception mode to AUTO to

allow stereo reception of subsequent broadcasts.