Pioneer Super Tuner IIID DEH-P6200BT Betriebshandbuch - Seite 19
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Auto-Empfänger Pioneer Super Tuner IIID DEH-P6200BT herunter. Pioneer Super Tuner IIID DEH-P6200BT 49 Seiten. Cd receiver
Auch für Pioneer Super Tuner IIID DEH-P6200BT: Installationshandbuch (8 seiten)
Seite drucken
You can adjust the currently selected equalizer curve
setting as desired. Adjusted equalizer curve settings
are stored in
or
! A separate
curve can be created for
each source. If you make adjustments when a
curve other than
zer curve settings will be stored in
! A
curve that is common for all sources
can be created. If you make adjustments when
the
curve is selected, the
curve will be updated.
1 Press
to display the setting mode.
2 Press
to cycle between equalizer band and
level.
3 Press
to switch to equalizer band and then
turn
to select.
4 Press
to switch to level and then turn
to adjust.
Adjustment range:
to
(loudness)
Loudness compensates for deficiencies in the low
and high frequency ranges at low volume.
1 Press
to display the setting mode.
2 Turn
to select the desired setting.
(off)
(low)
3 Press
to confirm the selection.
(subwoofer on/off setting)
This unit is equipped with a subwoofer output which
can be turned on or off.
1 Press
to display the setting mode.
2 Turn
to select the desired setting.
(normal phase)
phase)
(subwoofer off)
3 Press
to confirm the selection.
(subwoofer adjustment)
The cut off frequency and output level can be ad
justed when the subwoofer output is on.
Only frequencies lower than those in the selected
range are outputted from the subwoofer.
1 Press
to display the setting mode.
2 Press
to cycle between cut off frequency and
output level of subwoofer.
3 Press
to switch to cut off frequency and then
turn
to select cut off frequency.
4 Press
to switch to output level and then turn
to adjust output level.
Adjustment range:
to
.
is selected, the equali
.
(mid)
(high)
(reverse
(high pass filter adjustment)
When you do not want low sounds from the subwoo
fer output frequency range to play from the front or
rear speakers, turn on the HPF (high pass filter). Only
frequencies higher than those in the selected range
are output from the front or rear speakers.
1 Press
to display the setting mode.
2 Turn
to select the cut off frequency.
(off)
3 Press
to confirm the selection.
(bass boost)
1 Press
to display the setting mode.
2 Turn
to adjust the level.
Adjustment range:
to
3 Press
to confirm the selection.
(source level adjustment)
(Source Level Adjustment) lets you adjust the vo
lume level of each source to prevent radical changes
in volume when switching between sources.
! When selecting FM as the source, you cannot
switch to
.
! Settings are based on the FM volume level, which
remains unchanged.
Before adjusting source levels, compare the FM
volume level with the level of the source you wish
to adjust.
! The AM volume level can also be adjusted with
this function.
1 Press
to display the setting mode.
2 Turn
to adjust the source volume.
Adjustment range:
3 Press
to confirm the selection.
Note
Operation is complete even if the menu is can
celled before being confirmed.
to
En
02
19