Pioneer X-CM66D Betriebsanleitung - Seite 11

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Auto-Empfänger Pioneer X-CM66D herunter. Pioneer X-CM66D 39 Seiten. Cd receiver system

Pioneer X-CM66D Betriebsanleitung

Getting started

Chapter 4:
Getting started

To turn the power on

Press the Í to turn the power on.
After use:
Press the Í to enter the power stand-by mode.

Setting the clock

1
Press Í to turn the power on.
2
Press TIMER on the remote control.
"CLOCK" is shown on the main display.
3
Press ENTER.
4
Press  /  to set the day, then press
ENTER.
5
Press  /  to set the hour, then press
ENTER.
Press  /  to set the minute, then press
6
ENTER to confirm.
7
Press ENTER.
To confirm the time display:
Press the TIMER. The time display will appear for about 10
seconds.
To readjust the clock:
Perform "Setting the clock" from step 1.
Note
• When power supply is restored after unit is plugged in
again or after a power failure, reset the clock.

Connecting to the network via Wi-Fi

You can enjoy features such as TuneIn and Spotify by
connecting to the network.
• Adjust the angle of the wireless antenna according to
the connection status.
• Do not connect the Ethernet cable.

Manual Setup

Enter the password (key) of the access point to establish
connection.
• Take a note of the SSID and password (key) which is on
the main unit of the access point.
1
Press MENU on the remote control.
2
Press / to select "Wi-Fi Setting", and
press ENTER.
3
Press / to select "Manual Setup", then
press ENTER.
4
Press / to select the SSID of the access
point to be connected, then press ENTER.
5
Press ENTER.
6
Enter the password.
/:Switch the type of text to enter.
abc...xyzABC...XYZ123...789 !"...|}~
/:Move the position to enter the characters.
7
Press ENTER.
"Connected" is displayed when the connection is established
and
lights.
04
11
En