Pioneer X-EM16 Betriebsanleitung - Seite 12

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Auto-Empfänger Pioneer X-EM16 herunter. Pioneer X-EM16 17 Seiten. System

Seite drucken

• If the settings are reset to the factory setting, all pairing

history will be deleted. In order to reset to factory

setting, press and hold INPUT and

more than 5 seconds, until "RESET" appears on the

display.

To cancel pairing

MODE

• Press

or change the source.

Terminating a Bluetooth connection

Press

MODE.

Press / to

press

Listen to music on the unit from a

Bluetooth capable device

Press INPUT on the remote control or

INPUT repeatedly on the main unit to switch the

source to [BT AUDIO].

The unit will start using the BT AUDIO function, and connect

with a Bluetooth capable device.

A Bluetooth connection will be created

between the Bluetooth capable device and the

unit.

Procedures for connecting to the unit should be performed

from the Bluetooth capable device.

• Please refer to the user's manual for your Bluetooth

capable device for details of the connection procedures.

Playback music from the Bluetooth capable

device.

• Press

on the remote control or I on the main

unit to playback.

You can control

Stopping playback and other operations can be

controlled using the Bluetooth capable device.

• When Bluetooth capable devise is not connected and

no operations have been performed for more than 15

minutes, the unit will automatically power off.

∫ Radio wave caution

This unit uses a 2.4 GHz radio wave frequency, which is a

band used by other wireless systems (see list below). To

prevent noise or interrupted communication, do not use this

unit nearby such devices, or make sure these devices are

switched off during use.

• Cordless phones

• Cordless facsimiles

• Microwave ovens

• Wireless LAN devices (IEEE802.11b/g)

• Wireless AV equipment

• Wireless controllers for game systems

• Microwave-based health aids

• Some baby monitors

Other, less common, equipment that may operate on the

same frequency:

• Anti-theft systems

• Amateur radio stations (HAM)

• Warehouse logistic management systems

• Discrimination systems for train or emergency vehicles

• In the event noise appears in your television image,

there is the possibility that a Bluetooth wireless

technology enabled device or this unit (including

products supported by this unit) are causing signal

on the unit for

select [DISCONNECT]

and then

and :/9.

interference with the antenna input connector of your

television, video, satellite tuner, etc. In this event,

increase the distance between the antenna input

connector and the Bluetooth wireless technology

enabled device or this unit (including products

supported by this unit).

• If there is something obstructing the path between this

unit (including devices supported by this unit) and the

device equipped with Bluetooth wireless technology

(such as a metal door, concrete wall, or insulation

containing tinfoil), you may need to change the location

of your system to prevent signal noise and interruptions.

∫ Scope of operation

Use of this unit is limited to home use. (Transmission

distances may be reduced depending on communication

environment).

In the following locations, poor condition or inability to

receive radio waves may cause the audio to be interrupted

or stopped:

• In reinforced concrete buildings or steel framed or iron-

framed buildings.

• Near large metallic furniture.

• In a crowd of people or near a building or obstacle.

• In a location exposed to the magnetic field, static

electricity or radio wave interference from radio

communication equipment using the same frequency

band (2.4 GHz) as this unit, such as a 2.4 GHz wireless

LAN device (IEEE802.11b/g) or microwave oven.

• If you live in a heavily populated residential area

(apartment, townhouse, etc.) and if your neighbor's

microwave is placed near your system, you may

experience radio wave interference. If this occurs, move

your unit to a different place. When the microwave is not

in use, there will be no radio wave interference.

∫ Radio wave reflections

The radio waves received by this unit include the radio wave

coming directly from the device equipped with Bluetooth

wireless technology (direct wave) and waves coming from

various directions due to reflections by walls, furniture and

building (reflected waves). The reflected waves (due to

obstacles and reflecting objects) further produce a variety of

reflected waves as well as variation in reception condition

depending on locations. If the audio cannot be received

properly due to this phenomenon, try moving the location of

the device equipped with Bluetooth wireless technology a

little. Also note that audio may be interrupted due to the

reflected waves when a person crosses or approaches the

space between this unit and the device equipped with

Bluetooth wireless technology.

∫ Precautions regarding connections

to products supported by this unit

• Complete connections for all devices supported by this

unit, including all audio cords and power cables before

connecting them to this unit.

• After completing connections to this unit, check the

audio and power cables to confirm that they not twisted

together.

• When disconnecting this unit, confirm that you have

sufficient working space in the surrounding area.

• When changing connections of audio or other cables for

products supported by this unit, confirm that you have

sufficient working space in the surrounding area.