Pioneer XC-HM81-S Betriebsanleitung - Seite 15
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Auto-Empfänger Pioneer XC-HM81-S herunter. Pioneer XC-HM81-S 42 Seiten. Network cd receiver system
Auch für Pioneer XC-HM81-S: Schnellstart-Handbuch (33 seiten)
Seite drucken
4
4
Watching iPod/iPhone images on your TV
To watch iPod/iPhone images on a television, connect it using
a composite video cable.
When an iPod/iPhone is connected to this receiver, the TV
output setting of the iPod/iPhone is automatically set to 'ON'.
Note
•
Some iPod allow the TV output setting to be changed while
connected.
•
When the iPod/iPhone is disconnected from this receiver,
the iPod/iPhone's TV output setting returns to its original
state.
Connect iPod/iPhone/iPad to the USB/iPod/iPhone/
iPad terminal
Connect your iPod/iPhone/iPad to the USB/iPod/iPhone/iPad
terminal on the receiver's front panel. Use the iPod cable
supplied with your iPod/iPhone/iPad for the connection.
•
For the cable connection, also refer to the operating
instructions for your iPod/iPhone/iPad.
STANDBY/ON
INPUT
NET STANDBY/
POWER
CHARGE
TIMER
USB
PHONES
AUDIO IN
iPod/iPhone/iPad
Note
•
The videos and images on the iPod cannot be viewed using
this connection.
Playing your iPod/iPhone/iPad
CAUTION
•
When your iPod/iPhone/iPad is connected to this receiver
and you wish to operate the iPod/iPhone/iPad directly, be
sure to hold the iPod/iPhone/iPad steady with the other
hand to prevent malfunctions due to faulty contacts.
1
Connect your iPod/iPhone/iPad.
To connect your iPod/iPhone/iPad, see Connecting your
iPod/iPhone/iPad on page 14.
2
Press iPod to select iPod as the input source.
iPod is shown on the display and starts playback.
Note
•
When the iPod/iPhone/iPad is connected to this receiver,
the playback information for the songs are displayed on the
iPod/iPhone/iPad display. Pressing iPod CTRL button on
the remote will switch the display and display the
information on the front panel of the receiver.
Watching images from iPod/iPhone
VOLUME
•
iPod/iPhone images can only be watched when the iPod/
iPhone is connected to this receiver by the iPod/iPhone
connector.
•
iPad images cannot be watched.
•
iPod/iPhone images cannot be displayed on the front panel
display of this receiver. Press iPod CTRL button on the
remote to switch the display to the iPod/iPhone side.
Important
•
If this receiver cannot play your iPod/iPhone/iPad, perform
the following troubleshooting checks:
Check whether the iPod/iPhone/iPad is supported by this
-
receiver (page 14).
Reconnect the iPod/iPhone/iPad to the receiver. If this
-
doesn't seem to work, try resetting your iPod/iPhone/
iPad.
Check the iPod/iPhone/iPad software is supported by this
-
receiver.
•
If the iPod/iPhone/iPad cannot be operated, check the
following items:
iPod/iPhone/iPad playback
Is the iPod/iPhone/iPad connected correctly? Reconnect
-
the iPod/iPhone/iPad to the receiver.
-
Is the iPod/iPhone/iPad experiencing a hangup? Try
resetting the iPod/iPhone/iPad, and reconnect it to the
receiver.
-
When connecting the iPad, use only an iPad dedicated
cable.
Tip
•
iPod/iPhone/iPad recharging occurs whenever an iPod/
iPhone/iPad is connected to this receiver. (This function is
supported in standby mode as well.)
•
When input is switched from iPod to another function,
iPod/iPhone/iPad playback is temporarily stopped.
15