Pioneer XC-L7 Betriebsanleitung - Seite 37

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Auto-Empfänger Pioneer XC-L7 herunter. Pioneer XC-L7 50 Seiten. Stereo cd receiver/stereo cassette deck/ speaker system

Seite drucken

SYNCHRO RECORDING (MD - TAPE) _ §

(Applicable only when the optional MiniDisc Recorder

MJ-L7 is purchased)

1. Perform steps 1-5 for CD — tape synchro

recording (1 P. 35).

2. Use the display unit or remote control unit

to select the MD function.

3. Load the MiniDisc whose contents you wish

to record.

Stop button

@ if a playback-only disc is loaded, playback will au-

tomatically begin from track 1. Press the stop but-

ton to stop playback.

4. Use the EJ, &] buttons to select the track

you wish to record (for 1-track synchro

recording).

@ When 4 specific track is selected in the above way,

1-track synchro recording will automatically be se-

lected.

@ Torecord all tracks on the MiniDisc, omit the above

step ( do not designate any specific track) and with

the MD recorder in stop mode, confirm that the dis-

. play shows the total tracks.

if the display does not show the total tracks, press

the MD recorder's stop button (m).

GR ECT PLA Be

(Creare

5. Press the recording pause button.

Lights

Flashes

The unit enters the recording pause mode.

6. Press the MD play/pause button or SET

button on the display unit.

@yvciso|

& ¢=") O0M

@ The MiniDise will begin playback and the cassette

deck will simultaneously begin recording.

@ When the MiniDisc completes playback, the cas-

sette tape will also stop.

m@ To manually stop recording

Press the stop button (™) on the MD recorder or

cassette deck.

Cy)

NOTES:

When the tape cassette comes to the end of side A

and recording switches to side B, if MD playback is

in the middle of a track, that entire track will be re-

corded anew on side B.

/fthe MD has been programmed for playback in a

specific track order, or for repeat playback, synchro

recording will be performed of the respective mode.

To perform synchro recording of a single track (1-

track synchro), use step 8 to designate the desired

track before beginning recording in step 9.

En <ARB7126> @