Pioneer XC-P410T Betriebsanleitung - Seite 29

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Auto-Empfänger Pioneer XC-P410T herunter. Pioneer XC-P410T 40 Seiten.

Seite drucken

1. Table of Contents

aes

ding is not

ck HL

ention tab

tart of the

y).

sired

1 must be

corded

ding.

ound can

ded.

28 PLAY

between

D FIELD

recorded,

utomatic

28 on the

used, in

bias and

RECORDING

CD RELAY

Lie

REVERSE

MODE

COPY

NORMAL

HIGH

ae aan,

EJECT

Copying a tape

The contents of the tape in Deck | can be copied onto the tape

in Deck IL.

1 Load the recorded tape into Deck [ and

the tape for recording into Deck H.

@ Tape copying begins in the forward direction (> ).

@ Wind the tape forward past the leader to the start of the

magnetic coated portion.

2 Set REVERSE MODE.

ped

One side is copied from Deck | to Deck II.

3, Cd: Both sides are copied from Deck | to Deck If.

3 Press COPY NORMAL or HIGH.

NORMAL:

for tape copying at normal speed.

HIGH; for tape copying at about twice normal speed.

To stop copying:

Press one of the STOP m@ buttons. Both decks will stop

simultaneously.

if a tape recorded with the DOLBY NR system is copied,

the copied tape will also be recorded automatically with the

DOLBY NR system regardless of the setting of the DOLBY

NR switch. If a tape recorded without the DOLBY NR

system is copied, the copied tape will also be recorded

automatically without the DOLBY NR system.

_@ Toperform normal copying while listening to playback, set

the function button on the receiver to TAPE and select the

appropriate DOLBY NR switch position,

@ The tape copy mode is canceled when the end of either of

the tapes is reached, so it is advisable to use tapes of the

same length.

Note on High-Speed Copy:

When performing high-speed copy, an interference beep

might be recorded if there is a TV nearby. In this case, use

normal speed copy or turn the TV power off.

REC PAUSE

Cae)

DECK

SHIF

eee

mp eet

"< DECK

ns aa

1 A A

wer

| To erase the contents of a tape

& TUNER

APE

PHONO

(CE)

1 Load the tape to be erased into Deck II.

@ Check to see that the accidental erasure prevention tab

has not been broken off.

2 Set the function button on the receiver to

TAPE.

3 Press REC PAUSE (@ 11} and PLAY ( » or

<a).