Pioneer AVIC-Z120BT Betriebshandbuch - Seite 19
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Empfänger Pioneer AVIC-Z120BT herunter. Pioneer AVIC-Z120BT 20 Seiten. Flash memory multimedia av navigation receiver
Auch für Pioneer AVIC-Z120BT: Schnellstart-Handbuch (2 seiten), Firmware-Update-Handbuch (2 seiten), User Information (45 seiten)
Seite drucken
Basic operation
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
Connecting your iPod
Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
p A USB interface cable for iPod (CD-IU50V)
(sold separately) is required for connection.
1
Pull out the USB storage device after
checking that no data is being accessed.
USB and mini-jack
connector
p For details about iPod compatibility with
this navigation system, refer to the informa-
tion on our website.
p Connection via a USB hub is not possible.
2
Connect your iPod.
Disconnecting your iPod
% Pull out the USB interface cable for iPod
after checking that no data is being ac-
cessed.
USB interface cable
for iPod
Flow from startup to
termination
1
Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
p To protect the LCD screen from damage, be
sure to touch the touch panel keys with
your finger only and gently touch the
screen.
2
Turn off the vehicle engine to termi-
nate the system.
The navigation system is also turned off.
On first-time startup
When you use the navigation system for the
first time, select the language that you want to
use.
1
Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
2
Touch the language that you want to
use on the screen.
3
Touch the language that you want to
use for the voice guidance.
The navigation system will now restart.
Chapter
02
19
En