Pioneer CT-W208R - Dual Cassette Deck Betriebsanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Empfänger Pioneer CT-W208R - Dual Cassette Deck herunter. Pioneer CT-W208R - Dual Cassette Deck 20 Seiten. Stereo double
Auch für Pioneer CT-W208R - Dual Cassette Deck: Katalog (10 seiten), Spezifikationen (1 seiten), Service-Handbuch (34 seiten), Betriebsanleitung (32 seiten), Service-Handbuch (34 seiten)
Seite drucken
CONNECTIONS
LINE
INPUT
OUTPUT
REC
PLAY
L
R
Recording
connection
cord
TAPE
REC PLAY
L
R
TAPE REC/PLAY
jacks
7
Before making or changing the connec-
tions, switch off the power switch and
disconnect the power cord from the AC
outlet.
7
Read through the operating instructions of the
stereo components which you intend to connect
to this unit.
7
Make sure that all of the connection plugs are in-
serted securely, as improper connections may
generate noise.
CONNECTING THE RECORDING
AND PLAYBACK CORDS
Left channel
Right channel
Red plug
Connect the TAPE jacks of your amplifier to the LINE
jacks of the cassette deck. Be sure to connect the
REC (INPUT) jacks of the deck to the recording (out-
put) jacks of the amplifier, and the PLAY (OUTPUT)
jacks of the deck to the play (input) jacks of the am-
plifier.
÷ Connect the plugs properly:
Left channel — White plug
Right channel — Red plug
CONTROL
IN
OUT
Control cable
Playback
connection
cord
Stereo Amplifier
White plug
Power cord
CONTROL OUT jack
PIONEER SYSTEM REMOTE CONTROL
CONTROL IN jack
Use the enclosed control cable to connect this jack to
the CONTROL OUT jack of another component which
bears the Î mark (indicating that it is equipped with
PIONEER System Remote Control). You will then be
able to operate this unit using the Pioneer system re-
mote control unit. If the remote control unit does not
have separate buttons for deck I and deck II, or a se-
lection button to choose deck I or deck II, the buttons
will only operate deck II. To operate deck I with a re-
mote control unit which was not designed for double
deck cassette players, see page 9.
CONTROL OUT jack
Intermediary jack outputs signals from the CONTROL
IN jack of this unit to the input jack of another unit.
Connect this jack to the CONTROL IN jack of another
component compatible with Pioneer System Remote
Control.
NOTE:
Be sure to connect both of the control cable's plugs
securely to the CONTROL IN and CONTROL OUT jacks.
Do not connect only one end of the cable.
CONNECTING THE POWER CORD
Insert the power cord of the cassette deck into the
accessory AC outlet of your amplifier, or into a nor-
mal household outlet.
Concerning about the
control cable be sure
to use the item in-
cluded in the pack-
age.
CONTROL
IN
OUT
7