Pioneer DCS-370 Betriebsanleitung - Seite 34
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Empfänger Pioneer DCS-370 herunter. Pioneer DCS-370 48 Seiten. Pioneer dvd receiver operating instructions
09
Other connections
•
Use an HDMI cable to connect the HDMI
OUT interconnect on this player to an HDMI
interconnect on a HDMI-compatible monitor.
To HDMI
input
ANTENNA
FM
UNBAL 75 Ω
AM LOOP
HDMI OUT
• The arrow on the cable connector body
should be face up for correct alignment
with the connector on the player.
You can also adjust the HDMI settings for
resolution and color. For more on these
settings see Video Output settings on page 27.
Switching the HDMI audio setting
To listen to audio from the HDMI interconnect,
make sure you've specified the HDMI audio
output setting.
1
Switch the system into standby.
Press SETUP and use / to choose
2
HDMI OUT then press ENTER.
Use / to choose the setting you want
3
then press ENTER.
• AUDIO ON – Audio signals are output
through the HDMI interconnect
• AUDIO OFF – Switches off HDMI audio
34
En
HDMI-compatible display
LINE 2
LINE
R
L
FRONT
IN
OUT
CONTROL
L
L
LINE 1
OUT
AV CONNECTOR
R
R
R
SURROUND
L
AUDIO
VIDEO
OUT
SPEAKERS (4 Ω - 6 Ω)
Resetting the HDMI connection
If you get an error message (the display shows
HDMI ERR) or if the screen goes blank (for
example, after changing the resolution), check
the troubleshooting guide on page 44. If this
doesn't solve the problem, follow the steps
below to reset the HDMI connection.
1
Switch the system into standby.
Press SETUP and use / to choose
2
HDMI INI then press ENTER.
The system will restart and the HDMI settings
CENTER
are automatically reset to the factory defaults.
SUB
WOOFER
See Video Output settings on page 27 for more
on these settings.
About HDMI
HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices.
HDMI was developed to provide the
technologies of High Bandwidth Digital
Content Protection (HDCP) as well as Digital
Visual Interface (DVI) in one specification.
HDCP is used to protect digital content
transmitted and received by DVI-compliant
displays.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multichannel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and
AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.