Pioneer DXT-X1669UB Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Empfänger Pioneer DXT-X1669UB herunter. Pioneer DXT-X1669UB 48 Seiten. Cd rds receiver

Seite drucken

Using this unit

Display indication

6 8

(list)

Sub information section

TA (traffic announcements)

TP (traffic program identification)

(sound retriever)

LOC (local seek tuning)

(repeat)

(random)

Main information section

! Tuner: band and frequency

! RDS: program service name, PTY infor-

mation and other literal information

! CD player and USB storage device:

elapsed playback time and text informa-

tion

Appears when a lower tier of folder or menu

exists.

Set up menu

After installation of this unit, turn the

ignition switch to ON.

SET UP appears.

Turn M.C. to switch to YES.

# If you do not use the unit for 30 seconds, the set

up menu will not be displayed.

# If you prefer not to set up at this time, turn M.C.

to switch to NO.

Press M.C. to select.

Follow these steps to set the menu.

To proceed to the next menu option, you need to

confirm your selection.

CLOCK SET (setting the clock)

1 Turn M.C. to adjust hour.

2 Press M.C. to select minute.

3 Turn M.C. to adjust minute.

4 Press M.C. to confirm the selection.

FM STEP (FM tuning step)

Use FM STEP to set FM tuning step options (seek

step settings).

1 Turn M.C. to select the FM tuning step.

100 (100 kHz)—50 (50 kHz)

2 Press M.C. to confirm the selection.

! The manual tuning step is fixed at 50 kHz.

AM STEP (AM tuning step)

Use AM STEP to set AM tuning step options (seek

step and manual tuning step settings).

1 Turn M.C. to select the AM tuning step.

10 (10 kHz)—9 (9 kHz)

2 Press M.C. to confirm the selection.

QUIT appears.

To finish your settings, turn M.C. to select

YES.

# If you prefer to change your setting again, turn

M.C. to switch to NO.

Press M.C. to select.

Using this unit

Notes

! You can set up the menu options from the

system menu and initial menu. For details

about the settings, refer to System menu on

page 7 and Initial menu on page 7.

! You can cancel set up menu by pressing

SRC/OFF.

Basic operations

Important

! Handle the front panel with care when re-

moving or attaching it.

! Avoid subjecting the front panel to excessive

shock.

! Keep the front panel out of direct sunlight

and high temperatures.

! To avoid damaging the device or vehicle inte-

rior, remove any cables and devices attached

to the front panel before detaching it.

Removing the front panel

1 Press the detach button to release the front

panel.

2 Push the front panel upward (M) and then pull

it toward (N) you.

3 Always store the detached front panel in a pro-

tective case or bag.

Re-attaching the front panel

1 Slide the front panel to the left.

2 Press the right side of the front panel until it is

firmly seated.

Forcing the front panel into place may result in

damage to the front panel or head unit.

Turning the unit on

1 Press SRC/OFF to turn the unit on.

Turning the unit off

1 Press and hold SRC/OFF until the unit turns

off.

Selecting a source

1 Press SRC/OFF to cycle between:

TUNER—CD—USB—AUX

! USB MTP displays while the MTP connection

is in use.

Adjusting the volume

1 Turn M.C. to adjust the volume.

Section