Pioneer VSX-519V-K Betriebsanleitung - Seite 18

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Empfänger Pioneer VSX-519V-K herunter. Pioneer VSX-519V-K 46 Seiten. Audio/video multi-channel receiver
Auch für Pioneer VSX-519V-K: Katalog (8 seiten), Spezifikationsblatt (2 seiten)

Seite drucken

Connecting up

Connecting an IR receiver

If you keep your stereo components in a closed

cabinet or shelving unit, or you wish to use the

sub zone remote control in another zone, you

can use an optional IR receiver (such as a Niles

or Xantech unit) to control your system instead

of the remote sensor on the front panel of this

receiver.

Connect the IR receiver sensor to the

IR IN jack on the rear of this receiver.

For more information on connecting the IR

receiver, see the Installation Instructions for

the IR Receiver.

Note

1 • Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote

sensor window.

• Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your component to check

for IR compatibility.

• If using two remote controls (at the same time), the IR receiver's remote sensor takes priority over the remote sensor on the

front panel.

Plugging in the receiver

Only plug in after you have connected all your

components to this receiver, including the

speakers.

Caution

• Handle the power cord by the plug part. Do

not pull out the plug by tugging the cord,

and never touch the power cord when your

hands are wet, as this could cause a short

circuit or electric shock. Do not place the

unit, a piece of furniture, or other object on

the power cord or pinch the cord in any

other way. Never make a knot in the cord or

tie it with other cables. The power cords

should be routed so that they are not likely

to be stepped on. A damaged power cord

can cause a fire or give you an electric

shock. Check the power cord once in a

while. If you find it damaged, ask your

nearest Pioneer authorized independent

service company for a replacement.

• The receiver should be disconnected by

removing the mains plug from the wall

socket when not in regular use, e.g., when

on vacation.

•

Plug the AC power cord into a power

outlet.