Pioneer VSX-524-K Betriebsanleitung - Seite 26

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Empfänger Pioneer VSX-524-K herunter. Pioneer VSX-524-K 40 Seiten. Av receiver
Auch für Pioneer VSX-524-K: Betriebsanleitung (38 seiten), Schnellstart-Handbuch (21 seiten), Schnellstart-Handbuch (21 seiten), Betriebsanleitung (40 seiten)

Seite drucken

Basic playback

Listening to the radio

The following steps show you how to tune in to FM and AM

radio broadcasts using the automatic (search) and manual

(step) tuning functions. Once you are tuned to a station you

can memorize the frequency for recall later—see Saving

station presets below for more on how to do this.

AUDIO

PARAMETER

TOP

SIGNAL SEL

HOME

PTY

iPod CTRL

Press TUNER to select the tuner.

Use BAND to change the band (FM or AM), if

necessary.

Each press switches the band between FM (stereo or

mono) and AM.

Tune to a station.

There are three ways to do this:

Automatic tuning

To search for stations in the currently selected band,

press and hold TUNE

for about a second. The

receiver will start searching for the next station, stopping

when it has found one. Repeat to search for other

stations.

Manual tuning

To change the frequency one step at a time, press

TUNE

High speed tuning

Press and hold TUNE

for high speed tuning.

Improving FM sound

If the TUNE or ST indicators don't light when tuning to an FM

station because the signal is weak, set the receiver to the

mono reception mode.

Press BAND to select FM MONO.

This should improve the sound quality and allow you to

enjoy the broadcast.

Saving station presets

If you often listen to a particular radio station, it's convenient

to have the receiver store the frequency for easy recall

whenever you want to listen to that station. This saves the

TOOLS

effort of manually tuning in each time. This unit can

memorize up to 30 stations.

ENTER

BAND

RECEIVER

SLEEP

SOURCE

RETURN

MUTE

RECEIVER

Tune to a station you want to memorize.

See Listening to the radio above for more on this.

Press TOOLS.

The display shows PRESET, then a blinking MEM and

station preset.

Press PRESET

want.

You can also use the number buttons.

Press ENTER.

The preset number stop blinking and the receiver stores

the station.

Note

• If the receiver is left disconnected from the AC power

outlet for over a month, the station memories will be lost

and will have to be reprogrammed.

AUDIO

TOOLS

PARAMETER

TOP

ENTER

INPUT

HOME

PTY

BAND

iPod CTRL

RETURN

MUTE

SIGNAL SEL

DISP

to select the station preset you

• Stations are stored in stereo. When the station is stored

in the FM MONO mode, it shows as ST when recalled.

Listening to station presets

You will need to have some presets stored to do this. See

Saving station presets above if you haven't done this already.

Press PRESET

to select the station preset you

want.

• You can also use the number buttons on the remote

control to recall the station preset.

Naming preset stations

For easier identification, you can name all of your preset

stations.

Choose the station preset you want to name.

See Listening to station presets above for how to do this.

Press TOOLS twice.

The cursor at the first character position is blinking on

the display.

Input the name you want.

Choose a name up to eight characters long.

• Use PRESET

to select character position.

• Use TUNE

to select characters.

• The name is stored when ENTER is pressed.

Tip

• To erase a station name, follow steps 1 and 2, and press

ENTER while the display is blank. Press TOOLS while the

display is blank, to keep the previous name.

• Once you have named a station preset, Press DISP to

show the name. When you want to return to the frequency

display, press DISP several times to show the frequency.