Pioneer VSX-605S Betriebsanleitung - Seite 12
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo-Empfänger Pioneer VSX-605S herunter. Pioneer VSX-605S 37 Seiten. Audio/video stereo receiver
Auch für Pioneer VSX-605S: Betriebsanleitung (37 seiten)
Seite drucken
caeaaeN Teeaeaa
| REAR PANEL FACILITIES
iilustration shows Multi-voltage model.
Qo
HG
@
1) FM/AM ANTENNA terminalis
Use these antenna terminals for reception of normal FM and
AM broadcasts.
(2) SAT(Satellite)/TV jacks (input)
Use these jacks if you wish to connect a TV (Digital satellite
system) tuner with both video and audio optpuis.
(3) VIDEO OUT {TO MONITOR TV) jack
Connect to a monitor TV or to TV sets with video input terminals
to watch program materials from a VCR or LD player connected
to this unit.
SYSTEM CONTROL IR OUT jacks
To aperate other components with this unit's remote control or
with GUI, connect the supplied repeater (See page 11).
MINI-REPEATER 1,2:
connect the supplied MINI-REPEATER.
MAIN-REPEATER:
connect the supplied MAIN-REPEATER.
12
<ARB7059>
©) CONTROL IN/OUT jacks
iN
:Connects this jack to the control out jack of an unit
attached ff mark using a commercially available cord
with mini-plugs (without load). The remote control
signal sensor of this unit will not receive the remote
control signal while connecting. The unit attached fj]
mark can be operated using a remote control through
the connected cord from the remote control sensor
of another unit attached (fj mark.
OUT
:Connects this jack to the control input jack of an unit
attached if] mark using acommercially available cord
with mini-plugs (without load).
Outputs the remote control signal to another unit
from this unit or the relay signal from the control input
jack.
Receiver
=
:
|
PIONEER component
ry
bearing
the i] mark.
Remote
.
a
control unit
NOTE:
@ if there is a piug in this unit's CONTROL IN jack, ISC and GUI
operations using the remote control unit are not possible,
® The remote
control unit provided with this unit acopts 4
different method from the remote control units of Pioneer
systems, Consequently, this unit and other components
will
not operate when the remote control unit is directed at the
remote control signal sensor window of the connected
components.
Other components will not operate unless a signal is received
by the sensor window of this unit, and this unit consequently
converts the signal received to the remote control signal
corresponding to the other component.
To the CONTROL IN jack of the PIONEER
component bearing the ise mark.
S