Pioneer VSX-605S Betriebsanleitung - Seite 17

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo-Empfänger Pioneer VSX-605S herunter. Pioneer VSX-605S 37 Seiten. Audio/video stereo receiver
Auch für Pioneer VSX-605S: Betriebsanleitung (37 seiten)

Seite drucken

OPERATING THE TUNER

Presa the POWER switch to the ON position.

Select TUNER with the input selector.

Be sure to turn the TAPE 2 MONITOR button OFF when listening

+9 AM or FM broadcasts.

Switch GN the SPEAKERS button corresponding to the speakers

you wish to use.

FM auto stereo reception and monaural reception

Each time you press the MPX MODE button, the MONO indicator

in the display section lights or goes out.

if an FM stereo broadcast is received when the MONO

indicator is out, the STEREO indicator lights, and sound is in

stereo.

if an FM stereo broadcast is received when the MONO

indicator is lit, the sound will be monaural. If there is

interference during stereo mode reception, switch to mono.

The sound will become monaural but interference will be

reduced.

TUNING INTO STATIONS

Turn the multi-jag, and the tuning frequency changes. (Switch

off when the GUI MODE button is on.)

Turning in a clockwise direction raises the frequency, while

turing in a counter-clockwise direction lowers the frequency.

1. Use the FM/AM button to select either FM or AM.

Confirm that the JOG MODE indicator in the display shows

"FREQ".

if "ST" is displayed, press the SELECT button to switch to

"FREQ".

2. Turn the multi-jog until you reach the frequency of a

desired station.

When a stations is received, the TUNED indicator will light

up.

NOTE:

The TUNED indicator may not light with broadcasts received

over long distances,

or when

the broadcast signals are

extremely weak.

3. Adjust the volume and tone as desired.

Auto tuning

Auto tuning is convenient when you do not remember the

frequency of a desired station, or when you wish to find stations

that you do not normally listen to, Operate by remote controi.

(Refer to page 23.)

You can also perform Auto tuning GUL (See page 28.}

PRESET TUNING

Switch off when the GUI MODE button is on.

4. Tune into the desired station.

See the section "TUNING INTO STATIONS". In addition to

station frequencies, the MPX MODE

(auto stereo mode or

monaural mode} can also be preset (FM only}.

2. Press the MEMORY button.

The station (channe!) number flashes in the display. (Memory

mode}

3. Turn the multi-jog to select the station ichannel) you

want to memorize, and press the ENTER button.

The station

(channel)

number

lights in the display,

indicating that it has been memorized.

® if you do not press the ENTER button within about five

seconds after selecting a station, the memory mode is

canceled.

4. Repeat steps 1 to 3 to preset additional stations.

A total of 30 AM and FM stations may be preset. When you

store a new preset, it takes the place of the previously stored

station (if any).

You can also preset using GUI. (See page 25.)