Pioneer VSX-821-K Betriebsanleitung - Seite 19

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo-Empfänger Pioneer VSX-821-K herunter. Pioneer VSX-821-K 20 Seiten. Audio/video multi-channel receiver
Auch für Pioneer VSX-821-K: Spezifikationen (2 seiten), Service-Handbuch (9 seiten)

Seite drucken

Connecting your equipment

Connecting a USB device

It is possible to listen to two-channel audio using the USB

interface on the front of this receiver.

 Switch the receiver into standby then connect your USB

device to the USB terminal on the front panel of this

receiver.

• Push down on the PUSH OPEN tab to access the USB

terminal.

• This receiver does not support a USB hub.

• For instructions on playing the USB device, see Playing a USB

device on page 24.

CONTROL

ON / OFF

PHONES

VIDEO 2 INPUT

MCACC

SETUP MIC

AUDIO R

VIDEO

This receiver

USB mass

storage device

Plugging in the receiver

Only plug in after you have connected all your components to this

receiver, including the speakers.

CAUTION

• Handle the power cord by the plug part. Do not pull out the

plug by tugging the cord, and never touch the power cord

when your hands are wet, as this could cause a short circuit or

electric shock. Do not place the unit, a piece of furniture, or

other object on the power cord or pinch the cord in any other

way. Never make a knot in the cord or tie it with other cables.

The power cords should be routed so that they are not likely to

be stepped on. A damaged power cord can cause a fire or give

you an electric shock. Check the power cord once in a while. If

you find it damaged, ask your nearest Pioneer authorized

independent service company for a replacement.

• Do not use any power cord other than the one supplied with

this unit.

2.1 A

• Do not use the supplied power cord for any purpose other than

iPod

USB

that described below.

iPhone

iPad

• The receiver should be disconnected by removing the mains

plug from the wall socket when not in regular use, e.g., when

on vacation.

Note

• After this receiver is connected to an AC outlet, a 2 second to

10 second HDMI initialization process begins. You cannot

carry out any operations during this process. The HDMI

indicator in the front panel display blinks during this process,

and you can turn on this receiver once it has stopped blinking.

When you set the Control with HDMI to OFF, you can skip this

process. For details about the Control with HDMI feature, see

Control with HDMI function on page 37.

Plug the supplied power cord into the AC IN socket on

the back of the receiver.

Plug the other end into a power outlet.