Pioneer VSX-D3S Gebrauchsanweisung - Seite 19

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Stereo-Empfänger Pioneer VSX-D3S herunter. Pioneer VSX-D3S 40 Seiten. Audio/video stereo receiver
Auch für Pioneer VSX-D3S: Betriebsanleitung (40 seiten)

Seite drucken

VIDEO RECORDING

Refer to the connection procedures on pages 8 to 10 and refer

to the VCR's Operating Instructions regarding proper operation

procedures. Recording can be performed on both VCR 1 and

VCR 2.

1. Select the source you want to record from with the input

selector buttons.

÷ When recording from a LaserDisc on VCR 1 or VCR 2 = LD

÷ When recording from the TV tuner on VCR 1 or VCR 2

÷ When recording from VCR 1 on VCR 2 = VCR 1

÷ When recording from VCR 2 on VCR 1 = VCR 2

÷ When recording on VCR 1 or VCR 2 from a component

connected to the front panel VIDEO INPUT jacks = VIDEO

SURROUND EFFECT

1. Select the desired mode with the DOLBY PRO-LOGIC button,

DSP MODE button and AC-3 button.

The DSP MODE changes in sequence each time the DSP

MODE button is pressed. (The DSP MODE indicator lights.)

JAZZ

DANCE

off

THEATER

÷ Press the DSP OFF button to switch the DSP off.

÷ If rear speakers are not selected during SPEAKER MODE

setting (page 29), pressing the DOLBY PRO-LOGIC button

selects DOLBY 3CH LOGIC.

= TV/SAT

HALL

SIMULATED

SURROUND

2. Start recording on the VCR.

For VCR, select a line input (external input).

3. Start playback on the component selected with the input

selector buttons.

The volume, balance and tone controls have no effect on the

recording.

NOTE:

When recording with VCR 1, be sure the input selector is set to

a position other than VCR 1. When recording with VCR 2, be sure

the input selector is set to a position other than VCR 2.

GUI operation enables easy copying from a LaserDisc to VCR 1

(or 2), and copying between VCR 1 and VCR 2. (Refer to page 28.)

2. Adjust levels to achieve a correct surround sound

reproduction.

This is done using GUI (page 24). For details concerning how

to perform level adjustment, refer to page 30.

You can set this unit to match the requirements and

specifications of your stereo system's speakers (whether or

not center speaker(s), rear speakers or a sub-woofer are

used, speaker size, etc.) to assure optimum sound quality.

Before using, perform settings in the SPEAKER MODE (refer

to page 29).

NOTE:

This unit does not feature conventional switching between

NORMAL/ WIDE / PHANTOM center modes.

ARB7050