Pioneer VSX-D3S Gebrauchsanweisung - Seite 29
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Stereo-Empfänger Pioneer VSX-D3S herunter. Pioneer VSX-D3S 40 Seiten. Audio/video stereo receiver
Auch für Pioneer VSX-D3S: Betriebsanleitung (40 seiten)
Seite drucken
SOUND EDIT OPERATION
÷ If you press the SOUND EDIT button on a function operation
display, display switches to "SOUND EDIT" indications for the
currently selected surround mode. (Press the EXIT button to
return to the original function operation display.)
÷ On the SOUND EDIT display, you can adjust levels and balances
set to the speaker mode, etc.
(When using PRO-LOGIC THEATER)
S O U N D E D I T
P R O - L O G I C T H E A T E R
SPEAKER
M A S T E R B A L A N C E
MODE
L
R E A R B A L A N C E
L
CENTER LEVEL
REAR LEVEL
SUB WF LEVEL
E F F E C T LEVEL
SETTING THE SPEAKER MODE
You can set this unit to match the requirements and specifications
of your stereo system's speakers (whether or not center
speaker(s), rear speakers or a sub-woofer are used, speaker
size, etc.) to assure optimum sound quality.
÷ Pressing the SPEAKER MODE button on the "SOUND EDIT"
display takes you to the "SPEAKER MODE" display.
SPEAKER MODE
FRONT
SPEAKER
LARGE
REAR
SPEAKER
SMALL 2
LFE MODE
LOW CUT FIL.
CROSS OVER
CENTER DELAY
REAR DELAY
÷ Set the SPEAKER MODE using the different buttons.
Selects the size of the front L, R speakers.
FRONT
SPEAKER
LARGE Ô SMALL
Selects center speaker size, or NONE if no center
CENTER
speaker is used.
SPEAKER
3
LARGE
Selects the size and number (1 or 2) of rear speakers,
REAR
or NONE if no rear speakers are used.
SPEAKER
3
LARGE x 2
NONE
(GUI OPERATION)
TEST
TONE
F - L
R
R
–
+
+10
dB
–
+
–10
dB
–
+
+6
dB
–
+
50
EXIT
CENTER
SPEAKER
SMALL
SUB
WOOFER
USE
+10
dB
ON
+
–
100
Hz
S
L
S
L
EXIT
3
3
SMALL
NONE
3
3 LARGE
SMALL x 2
2
SMALL 2
During Pro-Logic reproduction, this unit does not let you
switch between NORMAL, WIDE, and PHANTOM center
mode settings. However, setting the SPEAKER MODE as
follows provides the same effects as these modes.
Front
Center
LARGE
SMALL
LARGE
LARGE
LARGE
NONE
Set the rear speaker to NONE for conventional 3CH Logic
reproduction.
Selects whether there is a sub-woofer or not.
SUB
WOOFER
USE Ô NONE
LFE MODE
÷ Attenuate LFE (Low Frequency Effect = ultra-low bass effect for
more powerful movie sound or music) level. It changes in
sequence each time the
3
3
+10 dB
NOTE:
If you set to "+10 dB", front three channel (L + R + C) output
power is required for the sub-woofer. If this is more power than
the sub-woofer can handle, clipping may occur resulting in
distortion.
LOW CUT FIL.
÷ Switch ON if the sub-woofer does not have high power handling
capabilities. (This enables bass boosting while reducing the
possibility of the sub-woofer clipping.)
ON Ô OFF
– +
CROSSOVER
÷ Set sub-woofer crossover frequency (highest frequency it can
–
reproduce). Press
to lower the crossover frequency and
+
press
to raise it. (100 Hz/150 Hz/200 Hz)
S L
CENTER DELAY
÷ Sets center channel delay time. Press
press
L
for longer delay.
÷ This is possible only when the AC-3 is selected.
S L
REAR DELAY
÷ Set rear (surround) channel delay time. Press
delay, press
L
for longer delay.
÷ This is possible only when the AC-3 or PRO-LOGIC is selected.
EXIT
Pressing
returns you to SOUND EDIT display.
\
NORMAL
\
WIDE
\
PHANTOM
button is pressed.
3
0 dB
OFF
S
for shorter delay,
S
for shorter
<
ARB7050
29
>