Pioneer A-607R Service-Handbuch - Seite 29

Blättern Sie online oder laden Sie pdf Service-Handbuch für Verstärken Pioneer A-607R herunter. Pioneer A-607R 29 Seiten. Stereo amplifier

Pioneer A-607R Service-Handbuch

8.4 SPECIFICATIONS

Amplifier Section
Continuous power output
(both channels driven at 20 Hz to 20 kHz)**
T.H.D. 0.06 %, 8 Ω ............................................. 60 W + 60 W*
T.H.D. 0.09 %, 4 Ω ............................................. 90 W + 90 W*
DIN Continuous power output (both channels driven at 1 kHz)
T.H.D. 1.0 %, 8 Ω ................................................. 75 W + 75 W
T.H.D. 1.0 %, 4 Ω ............................................. 120 W + 120 W
Total harmonic distortion**
20 Hz to 20 kHz, 30 W, 8 Ω .......................................... 0.06 %*
÷ Power output specification is for when power supply is
230V.
Input sensitivity/ impedance
PHONO (MM) ..................................................... 2.8 mV/ 50 kΩ
CD, TUNER, LINE, TAPE 1/MD,
TAPE 2 MONITOR ............................................ 200 mV/ 50 kΩ
PHONO (MM) overload level
1 kHz, T.H.D. 0.1 % ...................................................... 150 mV
Output level/ impedance
TAPE 1/MD, TAPE 2 MONITOR output
............................................................................. 200 mV/ 1 kΩ
Frequency response
PHONO (MM) .................................... 20 Hz to 20 kHz ± 0.5 dB
CD, TUNER, LINE, TAPE 1/MD,
TAPE 2 MONITOR ................................. 5 Hz to 150 kHz
Tone control
BASS ................................................................ –8 dB (100 Hz)
TREBLE ............................................................. –8 dB (10 kHz)
Loudness contour (volume control set at –30 dB position)
.............................................. + 5 dB (100 Hz)/ + 3 dB (10 kHz)
• ACCESSORIES
Power cord (ADG1154)
MY/EW and MY/GR types
Power cord (ADG1158)
SD type
+0
dB*
–3
Power cord with fuse (ADG1156)
MV type
Signal-to-Noise ratio (IHF short circuit, A network)
PHONO (MM, 5 mV input) .............................................. 88 dB*
CD, TUNER, LINE, TAPE 1/MD,
TAPE 2 MONITOR ....................................................... 108 dB*
Signal-to-Noise ratio (DIN, continuous power/ 50 mW)
PHONO (MM) ..................................................... 71 dB/ 67 dB*
CD, TUNER, LINE, TAPE 1/MD,
TAPE 2 MONITOR ............................................. 95 dB/ 71 dB*
MUTING (volume control set at –30 dB position) ................ –20 dB
Power Supply/ Miscellaneous
Power requirements ......................... AC 220 - 230 Volts, 50/ 60 Hz
Power consumption .............................................................. 220 W
AC outlets (European model only)
Switched (x2) .......................................................... total 100 W
Unswitched (x1) ................................................................ 50 W
Power Consumption in standby mode ...................................... 1 W
Dimensions (including knobs and other protruding parts)
............................................... 420 (W) x 335 (D) x 128 (H) mm
Weight (without package) ...................................................... 7.0 kg
Accessories
Remote control unit ........................................................................ 1
Batteries (AA/R6P) ......................................................................... 2
Operating instructions .................................................................... 1
Power cord(Rated current 2.5 A) ................................................... 1
NOTE:
Specifications and design subject to possible modification without
notice, due to improvements.
*
Measured with the DIRECT button set to on.
** Measured by Audio Spectrum Analyzer.
STANDBY / ON
AMP
TAPE
SELECT
I
DECK
4
DISC
SELECT
CD
TAPE 1
STEREO AMPLIFIER
REMOTE CONTROL UNIT
Batteries (AA/R6P)
(AEX-010)
A-607R
CD
TUNER
TAPE
Remote control unit
2
7
3
TAPE
II
1
¡
DECK
(CU-A018)
¢
7
3
CD
_
+
STATION
(AXD7187)
TUNER
+
TUNER
PHONO
VOLUME
TAPE 2
LINE
Î
29