Pioneer A-66X Betriebsanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Verstärken Pioneer A-66X herunter. Pioneer A-66X 12 Seiten.
Seite drucken
FRONT
PANEL
SPEAKERS
ALANCE
@) POWER switch/indicator
Press to turn power to the unit ON and OFF.
Depressed position (ON): Power is supplied to the unit.
Released
position
(OFF):
Power
to the unit is discon-
nected.
(2) SPEAKERS selector switch
Use to select the speaker systems used for playback.
[OFF]
—No
sound
is produced
from
the
speaker
systems.
Set to this position when using headphones.
[A]
— Sound
is produced
from
the speaker
systems
con-
nected to the SPEAKERS.A terminals.
[B]
' — Sound
is produced
from
the speaker
systems
con-
nected to the SPEAKERS B terminals.
[A +B]
— Sound
is produced
from
both
the speaker
systems
connected
to the
SPEAKERS
A
and
SPEAKERS
B
terminals.
(8) BASS tone control
Use to adjust the low-frequency
tones. The central ''0''
position is the flat (normal) position. When turned to the
right, low-frequency tones are emphasized; when turned
to the left, low-frequency tones are de-emphasized,
This
function
does
not
operate
when
the
LINE
STRAIGHT switch is in the ON position.
PANEL
FACILITIES
(a PHONG
SELECTOR
0.2mv/1000
AMC,
=MM
LRN}
2-5 mvsaKa
@ TREBLE tone control
Use for adjusting the high-frequency tones.
The
central
''0'"' position
is the flat (normal)
position.
When
turned
to
the
right,
high-frequency
tones
are
emphasized; when turned to the left, high-frequency tones
are de-emphasized.
This
function
does
not
operate
when
the
LINE
STRAIGHT switch is in the ON position.
(6) TAPE
MONITOR
switches/indicators
Use this switch to listen to tape playback, or to listen to
the sounds being recorded during tape recording.
[TAPE 1]
— Set to this position to listen to the playback sound of
the tape deck connected to the TAPE 1 PLAY terminals,
or to monitor
the sound
being recorded
on the tape
deck connected to the TAPE 1 REC terminals.
[OFF]
— Leave set in this position when not listening to tape
playback,
[TAPE 2]
— Set to this position to listen to the playback sound of
the tape deck connected to the TAPE 2 PLAY terminals,
or to monitor
the sound
being recorded
on the tape
deck connected to the TAPE 2 REC terminals.
@ PHONO SELECTOR switch
Set in accordance with the type of cartridge used in your
record turntable,