Pioneer A-676 Betriebsanleitung - Seite 28
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Verstärken Pioneer A-676 herunter. Pioneer A-676 32 Seiten. Stereo amplifier
Auch für Pioneer A-676: Betriebsanleitung (16 seiten), Betriebsanleitung (17 seiten)
Seite drucken
SPECIFICATIONS
[A-676]
Continuous power output (both channels driven at 20 Hz to 20 kHz)**
T.H.D. 0.007 %, B80) vo. cceccseeseeeteseeeeeeeeerenens 70W
+ 70 W*
T.H.D. 0.009 %, 40 oo. eecccecceceteereseeeneseeees 95 W + 95 W*
DIN Continuous power output (both channels driven at 1 kHz)
TsH. Di 1,026} 8 0 voce cisecdec iced cia ccsascctettesctsetaars 80 W + 80W
TA D120: 64:
ccsccen c cneticciewe
nit elsebecr eens 120 W + 120 W
Power bandwidth
0:05:96; BO soicieh ta cletscencestiessasseanhanciedeeetees 5 Hz — 80 kHz*
Damping factor
(1 kHz/20 Hz to 20 kHz), 8 Qo...
ccceceee scence eee eee tenes 150/70
Dynamic power output (on EIA dynamic test signal)
BUD ices
icc ccscceas sebwes ns ccavatewsecevegnancescusscenaceete 150 W/200 W
Total harmonic distortion * *
20 Hz to 20 kHz, 70 W, 82
20 Hz to 20 kHz, 95 W, 40
Inter-modulation distortion (at rated output) ...............+ 0.007 %*
© Above specifications are for when power supply is 230 V
Input sensitivity/impedance
PHONO (MM) .....:..0ccccsccescceeseneeeeaersnnesceseseuseees 2.5 mV/50 kQ
PHONO (MC).....c0c:ccceecscceecnscneceseneteaeeuseeseeeeeees 0.2 mv/100 Q
CD, TUNER, LINE, TAPE ...........cc:eceeeesseneeen
scenes 150 mV/50 kQ
PHONO overload level
1 kHz, T.H.D. 0.008 % (MM/MC) .......:eeeceeeereee 200 mV/19 mV
Output level/impedance
TAPE REC, ADAPTOR OUTPUT ..........::00:0eseeeee 150 mV/2.2 kQ
Frequency response
PHONO (MM), 20 Hz to 20 KHZ .......-eeccecceeeeeeteeeeen ees + 0.2 dB
PHONO (MC), 20 Hz to 20 KHZ..........:eceeseecueeeesaereres + 0.3 dB
CD, TUNER, LINE, TAPE, 1 Hz to 150 KHZ...........0esseeeee +3 dB*
Tone control (volume control set at — 40 dB position)
BASSies ccessconeteangcteanthonnnvaws
vena secbdsves actiyene oe + 8 dB (100 Hz)
TREBLE .asssis ceetienicies caution sxnes cenavescdsendoedzcssey + 8 dB (10 kHz)
Loudness contour (volume control set at — 40 dB position)
sabes UUdiRaU eae cosesebaadovenagnevceedan +5 dB (100 Hz)/+3 dB (10 kHz)
Filter (SUBSONIC),..........:cccesccsecsseeeseeerenseeees 17 Hz (12 dB/oct.)
Signal-to-Noise ratio (IHF short circuit, A network)
PHONO
(MM, 5 mV tnput/MC, 0.5 mV input) ....... 94 dB/76 dB*
CD, TUNER, LINE, TAPE ..........::ccsesscceeceeseennseneceneeens 110 dB*
Signal-to-Noise ratio (DIN, continuous power/50 mW)
PHONO (MM) .........ccceeceeeeevenseeesenseensansnereneeeees 74 dB/65 dB*
CD, TUNER, LINE, TAPE ........-..cssscsseeecenseeeeeeenes 92 dB/68 dB*
Power Supply/Miscellaneous
Power requirements ..........:00- a.c. 220 — 230 Volts~ , 50/60 Hz
Power ComSurmption ........ccccccesseecneceeeeeeeeeeaeeeeaee
nena eens 650 W
DiMeNIONS ...........cecereeeeeeeee eee 420 (W) x 435 (D) x 162 (H) mm
Weight (without package).........-.2.:scseceeeeeesecenecreeenensanes 12.8 kg
Accessories
Operating INStrUCtiONS .........cccccceseceeeeeeeeenn
cena eee nestaeeeetesea pees 1
NOTE:
Specifications and design subject to possible modification without
notice, due to improvements.
*
When the DIRECT button to ON.
** Measured by Audio Spectrum Analyzer.
28
<ARE1194>
En
[A-777]
Continuous power output (both channels driven at 20 Hz to 20 kHz)* *
TAH: D...0:007 96,8) Oi vcccs acai
diese tecssteiecesnee ss 95 W + 95 W*
T.H.D. 0.009 %, 4 OQ... ceccceeceneen
eee eeee 140 W + 140 W*
DIN Continuous power output (both channels driven at 1 kHz)
TH
Di 10°96; Bi Qisecictcccect cbesescaiasacioscineceses 100 W + 100 W
TD:
1096; 4 Qe siascerceiseceisecka seeeuedtevterstres 150
W + 150 W
Power bandwidth
0:05%* 8: ON
iaeesccih
a
He
ree
ee
ees
5 Hz — 80 kHz*
Damping factor
(1 kH2/20 Hz to 20 KHZ), 8 QD oe.
cece cee eee een eeeeeenene 150/70
Dynamic power output (on EIA dynamic test signal)
BQ] 2 Desens
Sosisclecaak avenge eas etaiteabads ehascaveee usta dass 220 W/350 W
Total harmonic distortion* *
20 Hz to 20 kHz, 95 W, BO... eccecscceceee
eee eee es 0.007 %*
20 Hz to 20 kHz, 140 W, 4.0........
cece ceeeeneer
eee eeees 0.009 %*
Inter-modulation distortion (at rated output) ..........ceee 0.007 %*
¢ Above specifications are for when power supply is 230 V
Input sensitivity/impedance
PHONO
(MM) .......cccccececeeeeceseneeeeseeeenseenesaneenens 2.5 mV/50 kQ
PHONO
(MC).........ccceccsceecersceeescceeaeeaseeensteeaenes 0.2 mV/100 Q
CD, TUNER, LINE, TAPE........c:cececeeceeeeeeeseeeneaes
150 mV/50 kQ
PHONO overload level
1 kHz, T.H.D. 0.008 % (MM/MC) ......ccccseereeeeee 200mV/19 mV
Output level/impedance
TAPE REC, ADAPTOR OUTPUT .........eeseeese
evens 150mV/2.2 kQ
Frequency response
PHONO
(MM), 20 Hz to 20 KHZ...
ee cecseeeceeeeeeeeeeenn
+ 0.2 dB
PHONO (MC), 20 Hz to 20 KHZ.........ccsseeeetnceeeesneeen
+ 0.3 dB
CD, TUNER, LINE, TAPE, 1 Hz to 150 KHZ.........cceeeene es +3 dB*
Tone control (volume control set at — 40 dB position)
BASS hs se secc oleae
aS ydee deeb id deni gaan comeagontt + 8¢dB (100 Hz)
TREBLE. 3. silicccisddevssesdacersaetaasdv
nent igccnacoateares + 8¢B
(10 kHz)
MUTING
Loudness contour (volume contro! set at — 40 dB position)
saaakse wleashactidediatshecheieversveede ee +5 dB (100 Hz)/+3 dB (10 kHz)
Filter (GUBSONIC)..........cccceeeceeeeeneeveceseeseeneee 17 Hz (12 dB/oct.)
Signal-to-Noise ratio (IHF short circuit,
A network)
PHONO
(MM, 5 mV input/MC, 0.5 mV input) ....... 94dB/76 dB*
CD, TUNER, LINE, TAPE .......cscccccececeserenseeeeerssnresene
110 dB*
Signal-to-Notse ratio (DIN, continuous power/50 mW)
PHONO
(MM) .........cscecesecceeeeeceesscureeseeenseneeeees 74dB/68 dB*
CD, TUNER, LINE, TAPE ..........:cessseeseeseeseeneeeeees 92dB/70 dB*
Power Supply/Miscellaneous
Power requirements ...........0068 a.c. 220 — 230 Volts~, 50/60 Hz
Power Consumption ........::eccceseccseeesssesenreeserereeersenenue ee 820 W
DIMENSIONS ........:.ceeeeeeeen
ence eens 420 (W) x 435 (D) x 1622 (H) mm
Weight (without package)..........::.ssseceseeeeseeeneeeeeeereene - 19.0 kg
Accessories
Operating INStrUCtIONS ...........ceceseeesnesceneeeneesesaeeeeetetige
PeRnEEe eS 1
Cushion Spacer Set 02.2... ccs eececees eee eeu sence ere rseneusneeetiige
feeeeenes 1
NOTE:
Specifications and design subject to possible modificatyra
without
notice, due to improvements.
*
When the DIRECT button to ON.
** Measured by Audio Spectrum Analyzer.
Published by Pioneer Electronic Crpeoration. —
Copyright © 1991 Pioneer Electroie
Corporation.
Ali nghts reserved.