Pioneer CT-F10 Betriebsanleitung - Seite 38

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Verstärken Pioneer CT-F10 herunter. Pioneer CT-F10 40 Seiten. Stereo cassette deck
Auch für Pioneer CT-F10: Service-Handbuch (28 seiten), Ergänzende Betriebsanleitung (21 seiten), Wartungshandbuch (28 seiten)

Seite drucken

Incorrect use can be mistaken for trouble or malfunction. If

you think there is something wrong with this component,

check the points below. Sometimes the trouble may lie in

another component. Check the other components and

electrical appliances being used. If the trouble cannot be

rectified even after checking the points below, ask your nearest

Pioneer authorized service station to carry out repair work.

• Check that the cooling vents are not blocked. Do not use

on thick carpet or cover with cloth in use.

• No sound when trying to listen to the radio.

• Check that the FM and AM antennas are connected

properly.

• Check that the disc is loaded with its printed/label side face

up.

• Check that the disc is clean and free of scratches and other

damage. If necessary, clean the disc.

• If you're listening to a stereo FM station, try switching to

mono.

• Check that the antenna(s) are connected securely.

• Try moving the antenna(s) to face a different direction.

• Check that there aren't any electrical appliances operating

near the antenna(s).

• Try using the alternative tuning frequency interval.

• Switch to auto stereo mode.

• Check that the clock has been set.

• Try replacing the batteries.

• Check that fluorescent light, or other strong light is not

shining onto the remote sensor.

• Make sure that you're using the remote within its

operating range.

• Check that the erase-protect tabs are intact, or covered

with tape. Cover broken tabs with tape to enable recording.

(page 35)

• Clean the tape heads. (page 35)

• Check that you're using either a Type I (Normal), or Type

II (C

) tape.

• Clean the heads. (page 35)

• Check that Dolby NR is set to the same setting as that used

during recording. (page 27)

• When the system is installed near a television set,

magnetic influence from the speakers may cause the

television's picture to be distorted. This symptom

frequently occurs when using an indoor antenna; in this

event, install an outdoor antenna, or separate the system

farther from the television.

• Static electricity and other outside electrical influences

may cause the system to operate incorrectly. In such cases,

unplugging and reconnecting the power cord may help

correct the problem.

• More than one of the same kind of component (CD tuner,

MD recorder, CD recorder or cassette deck) cannot be

connected at the same time.