Pioneer DC-Z85 Betriebsanleitung - Seite 16

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Verstärken Pioneer DC-Z85 herunter. Pioneer DC-Z85 28 Seiten. Stereo double cassette deck amplifier / fm/am digital synthesizer tuner / stereo turntable

Seite drucken

BASIC OPERATIONS

RECORDING ONTO A CASSETTE TAPE

(Cassette deck operation)

Material can be recorded on Deck Il only. Recording is not possible

on Deck |. You can make a recording of source which has passed

through the sound image controller.

1. Press EJECT button, and load the tape for recording into deck II.

® Check to see that the accidental erasure prevention tabs are not

broken off.

® Make sure that there is no tape slack.

2. Set DOLBY NR switch to the desired position.

* A tape which has been recorded using the DOLBY NR system

must be played back with the same system.

3. Use the input selector button on the amplifier to select the

recording source.

Program source

Selected indicator

Operation

Record

"PHONO

"Operate the turntable

Radio broadcast

TUNER

| Tune intoa broadcast

Tape

TAPE

Play atape in deck |

Compact disc

;

—¢

Play a compact disc

Equipment which

Operate the equipment

is connected to

LD/VCR

connected to LD/VCR

LD/VCR jacks

jacks

4. Create your own original sound with the sound image con-

troller,

5. Press REC button ( @ ).

® The REC indicator lights.

® The direction indicator flashes.

6. Press the appropriate PLAY button ( > or <1).

® When you start recording with the ® button, at the end of the

tape, recording automatically continues in the <4 direction

({both-side recording).

® When you start recording with the «4 button, recording stops at

the end of the tape.

7% Play the recording source.

8. To stop recording, press STOP button ( B ).

Auto reverse function

This unit uses rotary type recording and playback heads, and the

same heads are used in both forward and reverse

directions. Tape-

end detection is employed to activate auto r

$@ Operation which

takes approx. 2 seconds after the tape is taken up.

NOTE:

A leader tape having a length equivalent to approx. § seconds is at-

tached to an ordinary

sette tape. This means that for two-way

travel of the leader tape

there will be a break of approx, 12 seconds in

the sound. Be very caretul of this, particularly when making a two-

way recording.

Pausing and restarting recording

1, Press PAUSE button { Hf).

® Recording will be suspended.

2. To restart recording, press PAUSE { H ) or PLAY button.

Recording muting

Use this function to create the 4-second blanks required for the

music search operation

@ Press MUTE ( O) button during

ording sound on the tape for

ording pause mode.

® To create a blank more than 4 seconds jong, hold the button down

for the desired time. The unit will enter the recording pause mode

when you release

the button.

¢To resume recording, press PAUSE ( @) button.

ording, and the unit will stop rec-

2out 4 seconds and will enter the rec

| DOLBY

NR SYSTEMS.

The Dolby NR Systems is designed

to reduce high-frequency noise

(tape hiss) during playback. The level of low-volume, high-frequency

sounds is increased during recording, and decreased by the same

amount during playback to

iginal level. In this process

the original high-frequency

noise

{most easily perceived

by the

human ear) is attenuated notably.

Dolby NR reduces high-frequency tape naise, widening the dynamic

tange.

NOTE:

Avoid playing back tapes recorded using the Dolby NR Systems with

DOLBY NR OFF, or tapes recorded without Dolby NR Systems with

DOLBY NR ON, since this

does nat allow faithful reproduction of the

original sound.

Set input selector button on the amplifier to PHONO.

. Place record on the platter mat,

. Remove the stylus cover and release the tonearm from the

arm rest.

. Set SPEED switch.

. Set ARM-ELEVATION switch to UP position.

. Move the tonearm by hand to the desired position over the

record.

Set ARM-ELEVATION

switch to DOWN

posi ftin.

® The tonearm descends onto the record and playback starts.

8. Adjust the volume with VOLUME

contral on the amplifier

9. To stop the player while a record is being played, press STOP

button.

wns

Oar

PLAYING THE COMPONENTS 'CONNECTED

TO THE CD OR LD/VCR JACKS

1: Set input setector button on the amplifier according to the

program source to be played.

When used in combination with Pioneer PQ-Z65, PD-Z75T or PD

Z85M CD player, the input selector automatically switches to CD

when CD playback starts.

2. Play the component to be used.