Pioneer GM-D8701 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Pioneer GM-D8701 herunter. Pioneer GM-D8701 16 Seiten. Class d mono amplifier
Auch für Pioneer GM-D8701: Benutzerhandbuch (8 seiten), Benutzerhandbuch (16 seiten)
- 1. About this Product
- 2. Before Connecting/ Installing the Amplifier
- 3. Setting Gain Properly
- 4. Connection Diagram
- 5. Before Connecting the Amplifier
- 6. Connecting the Speakers
- 7. Connections When Using the Speaker Input Wire
- 8. Solderless Terminal Connections
- 9. Connecting the Speaker Output Terminals
- 10. Before Installing the Amplifier
- 11. Attaching the Bass Boost Remote Control
- 12. Example of Installation on the Floor Mat or Chassis
- 13. Specifications
( Setting the unit
)
- - - - - - - - - - - - - - - - -
•
A cut in sound output may indicate impro-
per setting of the gain control. To ensure
continuous sound output with the head
unit at a high volume, set amplifier gain
control to a level appropriate for the precut
maximum output level of the head unit. so
that volume can remain unchanged and to
control excess output.
•
Despite correct volume and gain settings,
the unit sound still cuts out periodically.
In
such cases, please contact the nearest
authorized Pioneer Service Station.
Gain control of this unit
Preout level: 2V (Standard: 500 mV)
NORM.Ll
1:.
:
~
2
v
I
GAIN
Precut level: 4 V
Above illustration shows
NORMAL
gain
set-
ting.
Relationship between amplifier gain
and head unit output power
Head unit volume steps
Head unit volume steps
Amplifier gain
------►
Amplifier gain
(normal)
(maximum)
If amplifier
gain
is raised improperly, this will
simply increase distortion, with little increase
in power.
En
(
______
.)
Signal waveform when outputting at
high volume using amplifier gain
control
Signal
waveform
•
• • • • Equal power • • •
Signal
waveform
Amplifier gain
- - - - - •
Amplifier gain
(normal)
(maximum)
If the signal waveform is
distorted
due to high
output, even if the amplifier gain is raised, the
output power will change only slightly.(!)