Pioneer GM-D8704 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Pioneer GM-D8704 herunter. Pioneer GM-D8704 16 Seiten. Bridgeable four-channel power amplifier
Auch für Pioneer GM-D8704: Service-Handbuch (17 seiten), Benutzerhandbuch (16 seiten)

Seite drucken

( ___ c_o_n_n_e_d_in_g_th_e_u_n_i_ts _ _ )

Connecting the speaker output

terminals

Use wire cutters or a utility knife to

strip the end of the speaker wires to ex-

pose about 10 mm (3/8 in.) of wire and

then twist the wire.

Twist

_______ wk

10mm (3/Sin.)

Connect the speaker wires to the

speaker output terminals.

Fix the wires securely with the terminal

screws.

G) Terminal screws

Speaker wires

@ Speaker output terminals

(_l_ns_t_a_lla_t_io_n _ _ _ _ _ )

Before installing the amplifier

AwARNING

•

To ensure proper installation, use the supplied

parts in the manner specified. If any parts

other than those supplied are used, they may

damage internal parts of the amplifier, or be-

come loose causing the amplifier to shut

down.

•

Do not install in:

Places where it could injure the driver or

passengers if the vehicle stops suddenly.

Places where it may interfere with the dri-

ver, such as on the floor in front of the dri-

ver's seat.

•

Install tapping screws in such a way that the

screw tip does not touch any wire. This is im-

portant to prevent wires from being cut by vi-

bration of the car, which can result in fire.

•

Make sure that wires do not get caught in the

sliding mechanism of the seats or touch the

legs of a person in the vehicle as short-circuit

may result.

•

When drilling to install the amplifier, always

confirm no parts are behind the panel and

protect all cables and important equipment

(e.g. fuel/brake lines, wiring) from damage.

AcAUTION

•

To ensure proper heat dissipation of the ampli-

fier, ensure the following during installation:

Allow adequate space above the amplifier

for proper ventilation.

Do not cover the amp I ifier with a floor mat

or carpet.

•

Place all cables away from hot places, such

as near the heater outlet.

•

The optimal installation location differs de-

pending on the car model. Secure the ampli-

fier at a sufficiently rigid location.

•

Check all connections and systems before

final installation.

•

After installing the amplifier, confirm that the

spare tire, jack and tools can be easily re-

moved.