Pioneer GM-X542 Service-Handbuch - Seite 24
Blättern Sie online oder laden Sie pdf Service-Handbuch für Verstärken Pioneer GM-X542 herunter. Pioneer GM-X542 26 Seiten. Bridgeable power amplifier
Auch für Pioneer GM-X542: Benutzerhandbuch (8 seiten)
Seite drucken
GM-X642,X542
8.2 SPECIFICATIONS
- GM-X642/X1R/EW
Power source .......................................................................................................... 14.4 V DC (10.8 — 15.1 V allowable)
Grounding system .......................................................................................................................................... Negative type
Current consumption .................................................................................................... 15.5 A (at continuous power, 4 Ω)
Average current drawn* ........................................................................................................ 5.6 A (4 Ω for two channels)
Fuse .............................................................................................................................................................................. 25 A
Dimensions ...................................................................................................................... 270 (W) × 60 (H) × 165 (D) mm
Weight .................................................................................................................... 2.7 kg (Leads for wiring not included)
Maximum power output .................................................................................................................. 100 W × 2 / 300 W × 1
Continuous power output ........................................................................ 75 W × 2 / 195 W × 1 (DIN45324, +B=14.4 V)
Load impedance .......................................................................................................................... 4 Ω (1 — 8 Ω allowable)
Frequency response .......................................................................................................... 10 — 50,000 Hz (+0 dB, –1 dB)
Signal-to-noise ratio .................................................................................................................... 105 dB (IEC-A network)
Distortion ........................................................................................................................................ 0.005 % (10 W, 1 kHz)
Separation ...................................................................................................................................................... 65 dB (1 kHz)
Low pass filter .............................................................................................................................. Cut off frequency: 80 Hz
High pass filter .......................................................................................................................... Cut off frequency: 80 Hz
Bass boost ................................................................................................................................................ Frequency: 60 Hz
Maximum input level/impedance .................................................................................. RCA: 6.5 V/22 kΩ (0.4 — 6.5 V)
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.
24
8.8 A (4 Ω for one channel)
(Bridge connection: 2 — 8 Ω allowable)
Cut off slope: –12 dB/oct
Cut off slope: –12 dB/oct
Gain: 0 — 18 dB
Speaker: 26 V/40 kΩ (1.6 — 26 V)