Pioneer ODR PREMIER RS-A1 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Pioneer ODR PREMIER RS-A1 herunter. Pioneer ODR PREMIER RS-A1 26 Seiten. Digital “pure class a” integrated amplifier

Seite drucken

@ Address setting

Multiple audio units* such as the RS-A1/RS-A2 Amplifier and Digital Equalizers

can be connected to the ODR System. Therefore, each audio unit must be

assigned an address as identification number (1 to 8).

Set the address according to the following rules:

+ Seta unique address to each audio unit.

+ The first audio unit must be assigned to Address 1.

+ Ifthe Digital Equalizer RS-P1 is included among the audio units, it must be

assigned as Address 1. Therefore, assign Addresses 2 to 8 to other audio units.

> The RS-P1 is fixed to Address 1, and this setting cannot be changed.

lf the Digital Equalizers RS-P50 is used instead of the RS-P1, assign Address 1 to

one of the RS-P50 equalizers.

@ Network mode setting

Set the mode for the network according to the purpose of the speakers to be con-

nected,

THRU

mode

(Frequency: 20 — 20,000Hz)

Set to this mode when the speaker to be connected will be used in full-range.

> In this mode, the functions of the network are disabled.

> This mode is invalid if the RS-P1 or RS-P50 Digital Equalizer is used in the ODR System.

> When using the ODR System in this mode, other digital amplifiers (RS-A1/RS-A2) must also

be set to THRU mode.

S.W. - MONO (subwoofer monaural) mode (Frequency: 20 — 250Hz)

Set to this mode when the speaker to be connected will be used as subwoofer to

output monaural sound.

S.W. - L (subwoofer L channel) mode (Frequency: 20 — 250Hz)

Set to this mode when the speaker to be connected will be used as subwoofer to

output L (left) channel sound.

S.W. - R (subwoofer R channel) mode (Frequency: 20 — 250Hz)

Set to this mode when the speaker to be connected will be used as subwoofer to

output R (right) channel sound.

S.W. - ST (subwoofer stereo) mode (Frequency: 20 — 250Hz)

Set to this mode when the speakers to be connected will be used as subwoofers

to output stereo sound.

*Audio units

By definition, audio units are Digital Amplifiers, Digital

Equalizer and other audio equipment for the ODR

System including the following:

— Dual 1/3 Octave Digital Equalizer [RS-P1]

— Universal Digital Preamp/Equalizer [RS-P50]

— Digital "Pure Class A" Integrated Amplifier [RS-A1]

— Digitat "Class A" Integrated Amplifier [RS-A2]